Skip to Content
Last modified by chatzies on 2025-11-27 11:35
From version 28.1
edited by ahenkel
on 2021-12-05 20:05
Change comment: There is no comment for this version
To version 10.1
edited by ahenkel
on 2021-12-01 11:25
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,17 +1,7 @@
1 +[[image:attach:TapeDrive_beschriftet.PNG||height="250"]][[image:attach:TapeDrive scheme.png||height="250"]]
1 1  
3 +**14.1 Revert from Crystallography to TapeDrive (P11 staff/CFEL)**
2 2  
3 -{{toc/}}
4 -
5 -[[image:attach:TapeDrive_beschriftet-tile.jpg||height="400"]]
6 -
7 -\\
8 -
9 -\\
10 -
11 -\\
12 -
13 -=== {{id name="14.SerialCrystallography:CFELTapeDrive-14.1RevertfromCrystallographytoTapeDrive(P11staff/CFEL)"/}}**14.1 Revert from Crystallography to TapeDrive (P11 staff/CFEL)** ===
14 -
15 15  * remove vortex
16 16  * beamstop to out-position?
17 17  * remove goniometer. The airbearing should be stopped (p11/servermotor/eh.1.01)
... ... @@ -60,7 +60,7 @@
60 60  
61 61  \\
62 62  
63 -=== {{id name="14.SerialCrystallography:CFELTapeDrive-14.2Samplecharacteristicsandpreparation"/}}**14.2 Sample characteristics and preparation** ===
53 +**14.2 Sample characteristics and preparation**
64 64  
65 65  suspension of microcrystals, **at least** 200 µL with 20% crystal density(more is always better), size range: 2-30 µm, **tip:** bring some mother liquor for washing, filtering, diluting etc.
66 66  
... ... @@ -68,138 +68,19 @@
68 68  
69 69  * filter through 30 µm cell filter (green) into Eppendorf or Falcon (original!) tube
70 70  
71 -[[image:attach:20211201_095534.jpg||height="250"]]
72 -
73 73  \\
74 74  
75 -=== {{id name="14.SerialCrystallography:CFELTapeDrive-14.3ConnectingsampletoElveFlow,sampleexchange"/}}**14.3 Connecting sample to ElveFlow, sample exchange
76 -** ===
77 -
78 -After filtration, screw the ElveFlow connector to your Eppendorf or Falcon tube. Make sure that the yellow-ish line goes to the bottom of your tube. You can adjust the length by unscrewing the blue fitting on top and pushing/pulling the yellow-ish line. **Don't forget to tigthen the blue fitting afterwards!**
79 -
80 -Be aware to which channel and nozzle line your sample is connected.
81 -
82 - Red → Channel 1, crystal line (nozzle capillary without marks)
83 -
84 - Green → Channel 2, substrate line (nozzle capillary is marked in black)
85 -
86 -[[image:attach:20211201_095033.jpg||thumbnail="true" height="250"]]
87 -
88 -After finishing data collection, flush all lines by connecting an Eppi or syringe filled with ddH,,2,,O.
89 -
90 -[[image:attach:20211201_095232.jpg||height="250"]][[image:attach:20211201_095205.jpg||height="250"]]
91 -
92 92  \\
93 93  
94 -=== {{id name="14.SerialCrystallography:CFELTapeDrive-14.4TapeDriveoperation"/}}**14.4 TapeDrive operation
95 -** ===
65 +**14.3 Connecting sample to ElveFlow**
96 96  
97 -The TapeDrive is controlled through kamzik. To open kamzik, start the server. A terminal will open and shortly after a small window.
98 -Now start the client. Same thing, a terminal will open, shortly after a small window.
99 -
100 -Click 'Devices' in the **client session** to open the control window.
101 -[[image:attach:screen.PNG||height="250"]][[image:attach:server client.PNG||height="250"]]
102 -
103 -**Tape**
104 -
105 -* Click on the 'main tape' icon
106 -* Change the velocity by typing anything from **0.3-3.0 mm/s**
107 -* Common velocity is 1.0-1.5 mm/s
108 -* kamzik displays the used tape in m and %. At 98% the tape will automatically stop since the rolls need to be exchanged at this point.
109 109  \\
110 -* [[image:attach:kamzik_tape.PNG||height="400"]]
111 111  
112 -==== {{id name="14.SerialCrystallography:CFELTapeDrive-Samplenozzle"/}}**Sample nozzle** ====
113 -
114 -* Click an the 'nozzle' icon.
115 -* (((
116 -The nozzle position can be adjusted in xyz by clicking on the arrows up and down. (Double arrow = 10 steps). Step size can be varied, 1mm steps are rather big and should be used carefully.
117 -The absolute position is **not calibrated** and therefore changes after each restart of kamzik.
118 -\\(% style="color: rgb(255,0,0);" %)**!!! **(% style="color: rgb(255, 0, 0); color: rgb(0, 0, 0)" %)**During data collection make sure in which direction you are moving, do not move nozzle into beam**(% style="color: rgb(255,0,0);" %)** !!!**(%%)
119 -\\Adjust the nozzle position by eye until it nearly touches the tape and roughly meets the X-ray interaction point. Then, move to the control hutch to use the on-axis microscope for fine adjustment. Move the nozzle tip to the beam position (red X) and write down the absolut nozzle position. From there move the nozzle in +x to your desired distance.Different distances combined with the tape speed result in several delay times for time-resolved experiments.
120 -
121 -(% class="wrapped" %)
122 -|=(((
123 123  \\
124 -)))|=(((
125 -direction
126 -)))|=(((
127 -recommended step size
128 -for visual adjustment
129 -)))|=(% colspan="1" %)(((
130 -recommended step size
131 -during data collection
132 -)))
133 -|(((
134 -+x
135 -)))|(((
136 -away from X-ray interaction point
137 -)))|(((
138 -1.0 - 0.5 mm
139 -)))|(% colspan="1" %)(((
140 -0.1 - 0.2 mm
141 -)))
142 -|(((
143 -+y
144 -)))|(((
145 -up
146 -)))|(((
147 -1.0 - 0.5 mm
148 -)))|(% colspan="1" %)(((
149 -0.1 - 0.2 mm
150 -)))
151 -|(((
152 -+z
153 -)))|(((
154 -towards detector tower, away from tape
155 -)))|(((
156 -0.5 - 0.2 mm
157 -)))|(% colspan="1" %)(((
158 -0.1 - 0.2 mm
159 -be careful with -z, tape could be pushed out of focus
160 -)))
161 161  
162 -**
163 -\\**
164 -)))
165 -* [[image:attach:kamzik_nozzle.PNG||height="400"]]
166 -
167 -==== {{id name="14.SerialCrystallography:CFELTapeDrive-Temperaturecontrol/Chiller"/}}**Temperature control/Chiller** ====
168 -
169 169  \\
170 170  
171 -\\
172 -
173 -\\
174 -
175 -\\
176 -
177 -Once the hutch is interlocked, set remote control to the TapeDrive laptop by opening a terminal and executing the following command:
178 -
179 - xfreerdp +clipboard /size:1920x1080 /u:Cfelusr /v:cfeld-pcx22611
180 - password: //written on control laptop (changes every 6 months)
181 -//
182 -
183 -\\
184 -
185 -\\
186 -
187 -=== {{id name="14.SerialCrystallography:CFELTapeDrive-14.5Taperollexchange"/}}**14.5 Tape roll exchange** ===
188 -
189 -The tape stops automatically at 98% used length, if you need to change the rolls for orther reasons, stop the tape (velocity = 0.0 mm/s).
190 -
191 -* Remove the (almost) empty feeder roll by pulling it upwards.
192 -* Cut the tape with some cm overlap to glue to the new roll. **Do not discard empty roll!**
193 -* Get a new tape roll (bottom left on the cart). **Polypropylen 15 µm**
194 -* Cut the first cm of the new tape roll, directly before the black sticky part.
195 -* Use this sticky part to attach the end of the old tape to the new roll. Place new roll on roll holder.
196 -* Open magnetic tape stabilizer.
197 -* Start the tape (3mm/s). Once the connetion side (black sticky part) has arrived at the collector roll, stop the tape (0mm/s).
198 -* Again, cut the tape directly in front of the black mark. Replace the the old roll with the **empty **one. Old roll can be discarded.
199 -* Attach new tape to the empty roll by using the black sticky part.
200 -* Close tape stabilizer.
201 -
202 -**[[image:attach:20211201_094101.jpg||height="250"]][[image:attach:20211201_094111.jpg||height="250"]]
73 +**14.4 TapeDrive operation
203 203  **
204 204  
205 205  \\
... ... @@ -206,12 +206,8 @@
206 206  
207 207  \\
208 208  
209 -=== {{id name="14.SerialCrystallography:CFELTapeDrive-14.6Nozzleexchange"/}}14.6 Nozzle exchange ===
210 -
211 211  \\
212 212  
213 -=== {{id name="14.SerialCrystallography:CFELTapeDrive-14.7Datacollection"/}}14.7 Data collection ===
214 -
215 215  \\
216 216  
217 217  \\
Confluence.Code.ConfluencePageClass[0]
Id
... ... @@ -1,1 +1,1 @@
1 -235041525
1 +235034346
URL
... ... @@ -1,1 +1,1 @@
1 -https://confluence.desy.de/spaces/11/pages/235041525/14. Serial Crystallography: CFEL TapeDrive
1 +https://confluence.desy.de/spaces/11/pages/235034346/14. Serial Crystallography: CFEL TapeDrive