Skip to Content
Last modified by chatzies on 2025-11-27 11:35
From version 83.1
edited by tabermah
on 2024-12-10 15:24
Change comment: There is no comment for this version
To version 81.1
edited by tabermah
on 2024-12-10 15:21
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -11,11 +11,11 @@
11 11  
12 12  = {{id name="14.SerialCrystallography:CFELTapeDrive-14.1Samplecharacteristicsandpreparation"/}}8.1. Sample characteristics and preparation =
13 13  
14 -* Suspension of microcrystals, **at least** 200 µL with 20% crystal density (more is always better), size range: 2-30 µm, **tip:** bring some mother liquor for washing, filtering, diluting etc.
14 +suspension of microcrystals, **at least** 200 µL with 20% crystal density (more is always better), size range: 2-30 µm, **tip:** bring some mother liquor for washing, filtering, diluting etc.
15 15  
16 16  Preparation:
17 17  
18 -* filter through 30 µm cell filter (green) or 50 µm (yellow) into an Eppendorf or Falcon (original!) tube
18 +* filter through 30 µm cell filter (green) or 50 µm (yellow) into Eppendorf or Falcon (original!) tube
19 19  
20 20  [[image:attach:20211201_095534.jpg||height="250"]]
21 21  
... ... @@ -24,6 +24,9 @@
24 24  
25 25  = {{id name="14.SerialCrystallography:CFELTapeDrive-14.2ConnectingsampletoElveFlow,sampleexchange"/}}8.2. Connecting sample to ElveFlow, sample exchange =
26 26  
27 +*
28 +** ==
29 +
27 27  After filtration, screw the ElveFlow connector to your Eppendorf or Falcon tube. Make sure that the yellow-ish line goes to the bottom of your tube. You can adjust the length by unscrewing the blue fitting on top and pushing/pulling the yellow-ish line. **Don't forget to tigthen the blue fitting afterwards!**
28 28  
29 29  Be aware to which channel and nozzle line your sample is connected.
... ... @@ -43,8 +43,10 @@
43 43  
44 44  = {{id name="14.SerialCrystallography:CFELTapeDrive-14.3TapeDriveoperation"/}}8.3. TapeDrive operation =
45 45  
46 -​​​​​​The TapeDrive is controlled through kamzik. To open kamzik, start the server. A terminal will open and shortly after a small window.
49 +*
50 +** ==
47 47  
52 +The TapeDrive is controlled through kamzik. To open kamzik, start the server. A terminal will open and shortly after a small window.
48 48  Now start the client. Same thing, a terminal will open, shortly after a small window.
49 49  
50 50  Click 'Devices' in the **client session** to open the control window.