Wiki source code of MTCA ADCs

Version 18.1 by sendels on 2021/02/10 15:08
Hide last authors
sndueste 7.1 1 Content:
sendels 2.1 2
sndueste 6.1 3
sndueste 7.1 4
sndueste 14.1 5 {{toc minLevel="2"/}}
sndueste 6.1 6
sndueste 8.1 7 ----
8
sndueste 6.1 9 = Our ADC cards =
sendels 2.1 10
sndueste 6.1 11 == GHz ADCs: SP-Devices ADQ412AC ==
sendels 2.1 12
13 We have ADQ412AC-4G-MTCA digitizer cards for the experiment crates (Exp1, Exp2 and FL2Exp1):
sendels 4.1 14 [[ADQ412_datasheet.pdf>>attach:10-0494_C_ADQ412_datasheet.pdf]] ( [[new version>>attach:10-0494-adq412_datasheet.pdf]], [[sampling rates table>>attach:Clocking_AppNote.pdf]])
sndueste 9.1 15 The cards are connected via Patch panels to the Experimental endstations and can be operated with a jddd panel:
sendels 2.1 16
sndueste 9.1 17 [[image:attach:image2019-10-21_15-21-23.png||width="800"]]
18
sendels 2.1 19 \\
20
sndueste 9.1 21 \\
22
sendels 4.1 23 * **NOTE: between ADC and Patch panel we have installed an [[EMP protector>>attach:EMP_protector.pdf]] and an additional 1dB attenuator**
sendels 2.1 24 * for the influence of the Patch cable and the EMP protector see also [[this logbook entry~[~[image:url:http://hasfweb.desy.de/pub/TWiki/TWikiDocGraphics/external-link.gif~|~|width="13" height="12"~]~]>>url:http://ttfinfo.desy.de/ExpHallelog/show.jsp?dir=/2016/27/08.07&pos=2016-07-08T17:41:07||shape="rect"]]
25
26 \\
27
sendels 3.1 28 (% class="wrapped" %)
sendels 2.1 29 |(((
30 Impedance AC
31 )))|(((
32 50 OHM
33 )))
34 |(((
35 Input voltage range
36 )))|=(((
37 800 mV pp!!!!!!!!!!!!!!!!
38 )))
39 |(((
40 Digitizer resolution
41 )))|(((
42 12 bit
43 )))
44
45 4 CHANNELS MODE
46
sendels 3.1 47 (% class="wrapped" %)
sendels 2.1 48 |(((
49 Sampling rate
50 )))|(((
sndueste 10.1 51 2 *
sendels 2.1 52 )))|(((
53 GSPS
54 )))
55 |(((
56 Analog bandwidth
57 )))|(((
58 2
59 )))|(((
60 GHz
61 )))
62
63 2 CHANNELS MODE
64
sendels 3.1 65 (% class="wrapped" %)
sendels 2.1 66 |(((
67 Sampling rate
68 )))|(((
sndueste 10.1 69 4 *
sendels 2.1 70 )))|(((
71 GSPS
72 )))
73 |(((
74 Analog bandwidth
75 )))|(((
76 1.3
77 )))|(((
78 GHz
79 )))
80
sndueste 10.1 81 ~* note that the sample rate is NOT locked to the FLASH repetition rate ! Thus there is a not integer number of samples between FLASH pulses. The sample rate also differs slightly from ADC card  to ADC card. The rough spacing is **1993.846** samples between 2 pulses at 1 MHz for details ask the local contact.
82
sendels 2.1 83 \\
84
85 ===== ADC and DOOCS / DAQ =====
86
87 The HDF5 names for the ADC traces are depending on the beamline :
88 \\PG Beamline:
89 {{code language="none"}}/FL1/Experiment/PG/ADQ412 GHz ADC/CH00/TD{{/code}}
90 {{code language="none"}}/FL1/Experiment/PG/ADQ412 GHz ADC/CH01/TD{{/code}}
91 {{code language="none"}}/FL1/Experiment/PG/ADQ412 GHz ADC/CH02/TD{{/code}}
92 {{code language="none"}}/FL1/Experiment/PG/ADQ412 GHz ADC/CH03/TD{{/code}}
93
94 BL Beamlines:
95 {{code language="none"}}/FL1/Experiment/BL1/ADQ412 GHz ADC/CH00/TD{{/code}}
96 {{code language="none"}}/FL1/Experiment/BL1/ADQ412 GHz ADC/CH01/TD{{/code}}
97 {{code language="none"}}/FL1/Experiment/BL1/ADQ412 GHz ADC/CH02/TD{{/code}}
98 {{code language="none"}}/FL1/Experiment/BL1/ADQ412 GHz ADC/CH03/TD{{/code}}
99 \\{{code language="none"}}/FL1/Experiment/BL2/ADQ412 GHz ADC/CH00/TD{{/code}}
100 {{code language="none"}}/FL1/Experiment/BL2/ADQ412 GHz ADC/CH01/TD{{/code}}
101 \\{{code language="none"}}/FL1/Experiment/BL3/ADQ412 GHz ADC/CH02/TD{{/code}}
102 {{code language="none"}}/FL1/Experiment/BL3/ADQ412 GHz ADC/CH03/TD{{/code}}
103
sndueste 15.1 104 and at FLASH2
105
106
107 \\\\\\\\{{code language="none"}}FL24:/FL2/Experiment/MTCA-EXP1/ADQ412 GHz ADC/CH00/TD/FL2/Experiment/MTCA-EXP1/ADQ412 GHz ADC/CH01/TD/FL2/Experiment/MTCA-EXP1/ADQ412 GHz ADC/CH02/TD/FL2/Experiment/MTCA-EXP1/ADQ412 GHz ADC/CH03/TD{{/code}}
108
109 \\
110
sendels 2.1 111 DOOCS prop : {{code language="none"}}FLASH.FEL/ADC.ADQ.PG/EXP1.CH00/CH00.TD  or CH00.DAQ.TD{{/code}}
sndueste 16.1 112 here the {{code language="none"}}CH00.TD{{/code}} is the full ADC trace as it is sampled ( typically several 100.000 samples per pulse train) while the {{code language="none"}}CH00.DAQ.TD{{/code}} trace only has the number of samples which are sent to the DAQ OR if //grouping// is activated the {{code language="none"}}CH00.DAQ.TD{{/code}} contains only the grouped spectra. To read the ADC trace with an online analysis program the {{code language="none"}}CH00.DAQ.TD{{/code}} is preferable to use ...
sendels 2.1 113 DAQ channel: {{code language="none"}}FLASH.FEL/ADC.ADQ.PG/EXP1.CH00{{/code}}
114
115 in addition there are also additional parameters saved like:
116
117 * sample frequency (in MHz)
118 * error (state)
119 * offset
120
121 \\
122
sndueste 6.1 123 == Amplifiers for the GHZ ADCs ==
sendels 2.1 124
sndueste 6.1 125 * **we can offer [[ Phillips scientific Model 6954>>attach:6954ds.pdf]] amplifiers** to either amplify small signals or to decouple setups which may deliver voltage peaks fro the ADCs.
126 * The available ADCs 5x, 10x, 20 x 50x and 100x
127 * The ADCs can be borrowed from Markus Braune
sndueste 16.1 128 * The Amplifiers fit perfectly to the dynamic range of the GHz ADCs - here a  [[ test of the Phillips scientific amplifier>>attach:Model_6954_Amplifier_Report.pdf]]
129 * There are also [[BiasTs>>attach:ZX85-12G-S+.pdf]] available ([[link to internal page>>doc:FLASH.Bias T]])
sndueste 6.1 130
131 \\
132
133 == 108 MHz ADCs:  Struck SIS8300-L2D ==
134
sendels 2.1 135 There is one in each of the MTCAs in the hall: MTCA-EXP1 at PG/BL1, the other at BL2 and BL3.
136
137 They are 16 bit, 10 channel, 125 MS/s ADCs.
138
139 \\
140
sendels 4.1 141 * [[User Manual SIS8300-L2 ADC ACM>>attach:sis8300l2-m-x009-1-v101.pdf]]
142 * [[User Manual SIS8900 RTM>>attach:sis8900-m-1-1-v104.pdf]]
sendels 2.1 143
144 50 Ohm input impedance, -1 V,...,+1 V default input range, analog signals can be routed to AC and DC input stage. The coupling is DC via op-amp (switching to AC transformer involves resoldering of SMD solder bridges).
145
146 Here is a trace of the first signal, a 1 MHz trigger connected from the x2timer board in the same MTCA:
147
sendels 17.1 148 [[image:attach:adc_mhz.jpg||height="400"]]
sendels 2.1 149
150 \\
151
sndueste 6.1 152 == Pulse energy server: Using the Struck SIS8300-L2D to detect only integrated values of pulses ==
sendels 2.1 153
sndueste 12.1 154 FS-LA (Falko Peters) programmed a pulse detection server that automatically detects peaks in the signal and integrates the samples around the peak.
sendels 2.1 155
sndueste 12.1 156 Things to set:
157
158 * Min peak height: threshold fro which on some signal is considered to be a peak. The actual peak is then determined as the maximum of the counts after the threshold
sendels 2.1 159 * pre and post peak integration time: how much ns to be integrated before and after the peak sample that are taken into account for the peak
160 * pre and post peak noise time: before and after the samples that are taken for the actual signal these samples are used as background ( they also can be used to define the "deadtime" of the detector before it searches for new peaks.
161
sndueste 12.1 162 \\
sendels 2.1 163
sendels 18.1 164 [[image:attach:image2019-11-18_17-9-7.png||height="400"]]
sndueste 11.1 165
sendels 17.1 166 [[image:attach:pulse_energy_server.jpg||height="400"]]
167
sndueste 12.1 168 \\
sndueste 11.1 169
sndueste 12.1 170 jddd  server panel  Definition of the parameters
171
sendels 2.1 172 \\
sndueste 11.1 173
174 \\
175
176 \\
sndueste 12.1 177
sndueste 13.1 178 = Detailed stuff =
179
180 * [[ADQ412 server description~[~[image:url:http://hasfweb.desy.de/pub/TWiki/TWikiDocGraphics/external-link.gif~|~|width="13" height="12"~]~]>>url:https://ttfinfo.desy.de/FLASHWiki/Wiki.jsp?page=SPdevicesDMA%20ADQ||shape="rect"]]
181 * [[ a collection of usefull things related to the OPIS ADCs>>doc:FLASH.OPIS ADC related things]]
182
sndueste 12.1 183 \\
184
185 \\
sndueste 13.1 186
187 \\
188
189 \\