Changes for page Trigger Howto

Last modified by sndueste on 2023/07/07 11:28
From version 8.1
edited by sndueste
on 2019/09/17 14:22
Change comment: There is no comment for this version
To version 6.1
edited by sndueste
on 2019/09/17 13:36
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -89,11 +89,11 @@
89 89  
90 90  [[image:attach:image2019-9-17_13-10-56.png||height="250"]] [[image:attach:image2019-9-17_13-8-46.png||height="400"]]
91 91  
92 -With the **"Expert overview"** one gets the overview over all channels available on the timing card and can configure the card. This is useful to look what channels are using clock settings or burst mode settings that one wants to change ... and using the other tabs one can set parameters for clocks and bursts (see below)
92 +With the "Expert overview" one gets the overview over all channels available on the timing card and can configure the card. This is useful to look what channels are using clock settings or burst mode settings that one wants to change ... and using the other tabs one can set parameters for clocks and bursts (see below)
93 93  
94 94  \\
95 95  
96 -For each trigger channel there is in addition an **"Expert panel"** to set the properties of THIS channel
96 +For each trigger channel there is in addition a expert panel to set the properties of THIS channel
97 97  
98 98  [[image:attach:image2019-9-17_13-14-52.png||height="250"]] [[image:attach:image2019-9-17_13-15-38.png||width="550"]]
99 99  
... ... @@ -110,15 +110,14 @@
110 110  
111 111  \\
112 112  
113 -The timer card provides the option to generate  frequencies that are synched to the FEL reprate on the ps level. One can set 3 Clocks by deviding the reference frequency of 54.2 MHz by n.** Please check (using the Expert overview ) before changing a frequency of it is used for some other channel !!**
113 +The timer card provides the option to generate  frequencies that are synched to the FEL reprate on the ps level. One can set 3 Clocks by deviding the reference frequency of 54.2 MHz by n.** Please check before changing a frequency of it is used for some other channel !!**
114 114  
115 115  Since our main FEL frequency is 100.31 MHz the dividers are not straight forward:
116 116  
117 -(% class="wrapped" %)
118 118  |=(((
119 119  Clock frequency
120 120  )))|=(((
121 -Divider to be set
120 +Devider to be set
122 122  )))
123 123  |(((
124 124  "1 MHz" (1000.31 kHz)
... ... @@ -126,40 +126,20 @@
126 126  53
127 127  )))
128 128  |(((
129 -"500 kHz" (501.5 kHz)
128 +\\
130 130  )))|(((
131 -107
130 +\\
132 132  )))
133 133  |(((
134 -"250 kHz" (250.8 kHz)
133 +\\
135 135  )))|(((
136 -215
135 +\\
137 137  )))
138 -|(% colspan="1" %)(((
139 -"200 kHz" (200.6 kHz)
140 -)))|(% colspan="1" %)(((
141 -269
142 -)))
143 -|(% colspan="1" %)(((
144 -"100 kHz" (100.3 kHz)
145 -)))|(% colspan="1" %)(((
146 -539
147 -)))
148 148  
149 -Once a clock is configured with the right frequency one can choose in the "expert panel" of the according channel the "FPGA clock" in the "input source select"  chooser.
150 -
151 -One has to set the
152 -
153 153  \\
154 154  
155 155  \\
156 156  
157 -This results in a continuous train of pulses with the set trigger width
158 -
159 -\\
160 -
161 -\\
162 -
163 163  * in order to generate a stable frequency one has to set the input source to FPGA clock (and use dividers to get the desired frequency)
164 164  * to generate the burst patterns of the FEL one has to choose a trigger event (best 116 for FLASH 2 and 16 for FLASH1) and activate Destination 1 for FLASH1 and Destination 2 for FLASH2 . finally one has to assign the activated Bunch pattern mask to the trigger channel of choice . now the pattern can be shifted and the trigger width can be changed as with the 10 Hz triggers. **IMPORTANT: to move the bunchtrain to the desired starting point the DELAY in the expert panel (see below) has to be used. The Trigger in the user panel (see above) has to be set to 0 !!!**
165 165  [[~[~[image:url:http://hasfweb.desy.de/pub/Setup/TriggerHowto/mtcatrigger2k.png~|~|alt="mtcatrigger2k.png" width="607" height="458"~]~]>>attach:mtcatrigger2k.png]]
... ... @@ -169,7 +169,3 @@
169 169  \\
170 170  
171 171  [[here is a link to the old VME trigger system>>doc:FLASH.VMETrigger]]
172 -
173 -\\
174 -
175 -\\