Changes for page The FLASH HDF5 structure

Last modified by sndueste on 2025/02/06 10:55
From version 73.1
edited by sndueste
on 2023/04/27 09:23
Change comment: There is no comment for this version
To version 63.1
edited by sndueste
on 2022/10/28 09:12
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -79,10 +79,12 @@
79 79  {{/layout-cell}}
80 80  
81 81  {{layout-cell}}
82 -* The //average// FEL pulse energy as example for the **slow** **data**. Here the data is not saved with 10 Hz  - thus not for every FEL pulse train.  The data is typically saved with 1 Hz if the values are changing (like the FEL energy) and every about 20 sec if there is no change for longer time ( e.g. motor set values). Thus to use the data together with the "fast" one, one has to interpolate the data as explained in the examples in the repos below show (e.g. {{code language="none"}}df['GMD_T_average'] = df['GMD_T_average'].interpolate(method='linear'){{/code}})
82 +* The //average// FEL pulse energy as example for the **slow** **data** (different e.g. 1 Hz):
83 83  
84 - ( as example only every 10th train ID is listed in the HDF group "index")
84 + ( every 10th train ID is listed in the HDF group "index")
85 85  
86 +\\
87 +
86 86  [[image:attach:image2020-11-16_15-31-45.png||height="250"]]
87 87  {{/layout-cell}}
88 88  
... ... @@ -454,78 +454,52 @@
454 454  units: ps (bigger numbers indicate later arrival time of the electrons)
455 455  {{/expand}}
456 456  
457 -====== **BAM FL0.DBC2**{{code language="none"}}{{/code}} ======
458 -
459 -(% style="color: rgb(255,102,0);" %)**DBC2**/electron bunch arrival time  (HDF5 name not yet implemented - see zraw)(%%)
460 -//always saved (PBD)//
461 -**FL0.DBC2**
462 -(% style="color: rgb(0,0,0);" %)channel: FLASH.SDIAG/BAM/**FL0.DBC2**/ARRIVAL_TIME.ABSOLUTE.SA1.COMP (%%)
463 -{{code language="none"}}/FL1/Electron Diagnostic/BAM/ DOOCS prop : FLASH.SDIAG/BAM//ARRIVAL_TIME.ABSOLUTE.SA1.COMPDAQ desc: Electron bunch arrival time measured with the BAM inside the accelerator (after bunch compressor 2). The property contains only the arrival time of the bunches sent to FL1 (e.g. if there are 30 bunches in FL1 the first 30 values are the arrival time the remaining numbers should be only 0). These are the same values as the "raw" data below - just "cleaned". The values{{/code}}(% style="font-family: SFMono-Medium , ~"SF Mono~" , ~"Segoe UI Mono~" , ~"Roboto Mono~" , ~"Ubuntu Mono~" , Menlo , Courier , monospace;letter-spacing: 0.0px;" %) show a very good correlation to the arrival time  of the XUV pulses in the experiment (see help).
464 -
465 -{{code language="none"}}units: fs (bigger numbers (typically) indicate later arrival times of the electrons).{{/code}}
466 -
467 -\\
468 -
469 -(% style="color: rgb(255,102,0);" %)DBC2/electron bunch arrival time (raw)  (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
459 +(% style="color: rgb(255,102,0);" %)DBC2/electron bunch arrival time{{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
470 470  //always saved (PBD)//
471 -DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.ABSOLUTE
472 -DAQ channel: (% style="color: rgb(0,0,0);" %)FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.ABSOLUTE (%%)
473 -desc: Electron bunch arrival time measured with the BAM inside the accelerator (after bunch compressor 2). Here the complete bunch train from the FEL is recorded (FLASH1 and FLASH2 pulses). Thus there are values from FLASH 1 in the first part. they may be separated by several "0" values if the reprate is different from 1 MHz ...  - It shows a very good correlation to the arrival time  of the XUV pulses in the experiment (see help). 
461 +DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.absolute.SA1
462 +DAQ channel: (% style="color: rgb(255,102,0);" %)FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.absolute.SA1 (%%)
463 +desc: Electron bunch arrival time measured with the BAM inside the accelerator (after bunch compressor 2) - It shows a very good correlation to the arrival time  of the XUV pulses in the experiment (see help).  The SA1 indicates the data is recorded for the first time slot at FLASh, typically used for FLASH1
474 474  units: fs (bigger numbers (typically) indicate later arrival times of the electrons).
475 475  
476 476  \\
477 477  
478 -(% style="color: rgb(255,102,0);" %)DBC2/error (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
468 +(% style="color: rgb(255,102,0);" %)DBC2/error{{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
479 479  //always saved (PBD)//
480 480  DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIM(% style="color: rgb(0,0,0);" %)E.bamError(%%)
481 -DAQ channel: (% style="color: rgb(0,0,0);" %)FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.BAMERROR(%%)
471 +DAQ channel: (% style="color: rgb(255,102,0);" %)FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.BAMERROR(%%)
482 482  desc: If the value is 0 , the BAM is working well. If it is non-zero there is a problem !!
483 483  
484 484  \\
485 485  
486 -(% style="color: rgb(255,102,0);" %)DBC2/status  (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
476 +(% style="color: rgb(255,102,0);" %)DBC2/error{{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
487 487  //always saved (PBD)//
488 488  DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIM(% style="color: rgb(0,0,0);" %)E..bamStatus.//1//(%%)
489 -DAQ channel(% style="color: rgb(0,0,0);" %): FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.BAMSTATUS.1(%%)
479 +DAQ channel: (% style="color: rgb(255,102,0);" %)FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.BAMSTATUS(%%)
490 490  desc: (% style="letter-spacing: 0.0px;" %) status bit: 0 - data is valid; 1 - beam present; 2 - calibration ongoing; 3 - feedback enabled; 4 - feedback acting;  mostly check for bit 0 == 1 is sufficient
491 491  
492 492  \\
493 493  
494 -====== **BAM FL1.SFELC**{{code language="none"}}{{/code}} ======
495 -
496 -(% style="font-family: SFMono-Medium , ~"SF Mono~" , ~"Segoe UI Mono~" , ~"Roboto Mono~" , ~"Ubuntu Mono~" , Menlo , Courier , monospace;letter-spacing: 0.0px;" %)/FL1/Electron Diagnostic/BAM/**SFELC**(% style="color: rgb(255,102,0);" %)/electron bunch arrival time  (HDF5 name not yet implemented - see zraw)
497 -
498 -//always saved (PBD)//
499 -(% style="color: rgb(23,43,77);" %)**FL1.SFELC**(%%)
500 -(% style="color: rgb(0,0,0);" %)channel: FLASH.SDIAG/BAM/(% style="color: rgb(0, 0, 0); color: rgb(23, 43, 77)" %)FL1.SFELC(% style="color: rgb(0,0,0);" %)/ARRIVAL_TIME.ABSOLUTE.SA1.COMP
501 -{{code language="none"}} DOOCS prop : FLASH.SDIAG/BAM//ARRIVAL_TIME.ABSOLUTE.SA1.COMPDAQ {{/code}}(% style="letter-spacing: 0.0px;" %)desc: Electron bunch arrival time measured  with the BAM  before the undulator (pulse resolved data). This one was newly installed in 2020.. The property contains only the arrival time of the bunches sent to FL1 (e.g. if there are 30 bunches in FL1 the first 30 values are the arrival time the remaining numbers should be only 0). These are the same values as the "raw" data below - just "cleaned". The values show a very good correlation to the arrival time  of the XUV pulses in the experiment (see help).
502 -units: fs (bigger numbers (typically) indicate later arrival times of the electrons).
503 -
504 -\\
505 -
506 -\\
507 -
508 -(% style="color: rgb(23,43,77);" %)SFELC(% style="color: rgb(255,102,0);" %)/electron bunch arrival time (raw) (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
484 +(% style="color: rgb(23,43,77);" %)SFELC(% style="color: rgb(255,102,0);" %)/electron bunch arrival time{{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
509 509  //always saved (PBD)//
510 -DOOCS prop : FLASH.SDIAG/BAM/(% style="color: rgb(23,43,77);" %)FL1.SFELC(%%)/ARRIVAL_TIME.ABSOLUTE
511 -DAQ channel:** **(% style="color: rgb(0,0,0);" %)FLASH.SDIAG/BAM/FL1.SFELC/ARRIVAL_TIME.ABSOLUTE (%%)
512 -desc: Electron bunch arrival time measured  with the BAM  before the undulator (pulse resolved data). This one was newly installed in 2020. Here the complete bunch train from the FEL is recorded (FLASH1 and FLASH2 pulses). Thus there are values from FLASH 1 in the first part. they may be separated by several "0" values if the reprate is different from 1 MHz ...  - It shows a very good correlation to the arrival time  of the XUV pulses in the experiment (see help). 
486 +DOOCS prop : FLASH.SDIAG/BAM/(% style="color: rgb(23,43,77);" %)FL1.SFELC(%%)/ARRIVAL_TIME.absolute.SA1
487 +DAQ channel: (% style="color: rgb(255,102,0);" %)FLASH.SDIAG/BAM/(% style="color: rgb(255, 102, 0); color: rgb(23, 43, 77)" %)FL1.SFELC(% style="color: rgb(255,102,0);" %)/ARRIVAL_TIME.absolute.SA1 (%%)
488 +desc: Electron bunch arrival time measured  with the BAM  before the undulator (pulse resolved data). This one was newly installed in 2020.  The SA1 indicates the data is recorded for the first time slot at FLASh, typically used for FLASH1
513 513  units: fs (bigger numbers (typically) indicate later arrival times of the electrons).
514 514  
515 515  \\
516 516  
517 -(% style="color: rgb(23,43,77);" %)SFELC(% style="color: rgb(255,102,0);" %)/error (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
493 +(% style="color: rgb(23,43,77);" %)SFELC(% style="color: rgb(255,102,0);" %)/error{{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
518 518  //always saved (PBD)//
519 519  DOOCS prop : FLASH.SDIAG/BAM/(% style="color: rgb(23,43,77);" %)FL1.SFELC(%%)/ARRIVAL_TIM(% style="color: rgb(0,0,0);" %)E.bamError(%%)
520 -DAQ channel(% style="color: rgb(0,0,0);" %): FLASH.SDIAG/BAM/FL1.SFELC/ARRIVAL_TIME.BAMERROR(%%)
496 +DAQ channel: (% style="color: rgb(255,102,0);" %)FLASH.SDIAG/BAM/(% style="color: rgb(255, 102, 0); color: rgb(23, 43, 77)" %)FL1.SFELC(% style="color: rgb(255,102,0);" %)/ARRIVAL_TIME.BAMERROR(%%)
521 521  desc: If the value is 0 , the BAM is working well. If it is non-zero there is a problem !!
522 522  
523 523  \\
524 524  
525 -(% style="color: rgb(23,43,77);" %)SFELC(% style="color: rgb(255,102,0);" %)/status  (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
501 +(% style="color: rgb(23,43,77);" %)SFELC(% style="color: rgb(255,102,0);" %)/error{{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
526 526  //always saved (PBD)//
527 527  DOOCS prop : FLASH.SDIAG/BAM/(% style="color: rgb(23,43,77);" %)FL1.SFELC(%%)/ARRIVAL_TIM(% style="color: rgb(0,0,0);" %)E..bamStatus.//1//(%%)
528 -DAQ chann(% style="color: rgb(0,0,0);" %)el: FLASH.SDIAG/BAM/FL1.SFELC/ARRIVAL_TIME.BAMSTATUS.1(%%)
504 +DAQ channel: (% style="color: rgb(255,102,0);" %)FLASH.SDIAG/BAM/(% style="color: rgb(255, 102, 0); color: rgb(23, 43, 77)" %)FL1.SFELC(% style="color: rgb(255,102,0);" %)/ARRIVAL_TIME.BAMSTATUS(%%)
529 529  desc: status bit: 0 - data is valid; 1 - beam present; 2 - calibration ongoing; 3 - feedback enabled; 4 - feedback acting;  mostly check for bit 0 == 1 is sufficient
530 530  
531 531  \\
... ... @@ -665,35 +665,14 @@
665 665  FLASH.LASER/FLACPUPGLASER1.PULSEENERGY/DIAG1out/PULSEENERGY.MEAN 
666 666  FLASH.LASER/FLACPUPGLASER1.PULSEENERGY/PG1_incoupl/PULSEENERGY.MEAN 
667 667  FLASH.LASER/FLACPUPGLASER1.PULSEENERGY/PG2_incoupl/PULSEENERGY.MEAN 
644 +
645 +
668 668  FLASH.SYNC/LASER.LOCK.EXP/FLASH1.MOD1.PG.OSC/FMC0.MD22.1.ENCODER_POSITION.RD 
669 669  FLASH.SYNC/LASER.LOCK.EXP/FLASH1.MOD1.PG.OSC/FMC0.MD22.1.ENCODER_POSITION_RAW.RD 
670 670  FLASH.SYNC/LASER.LOCK.EXP/FLASH1.MOD1.PG.OSC/FMC0.MD22.1.POSITION.RD
671 671  
672 -**BL - Hidra laser **
673 -
674 -Property,Units,Description
675 -FLASH.LASER/MODBL.CAM/BL1.13.AC/DAQ_CHANNEL,'AU','FL1HIDRAPP1 Autocorrelation (IR) ROI readout'
676 -FLASH.LASER/MODBL.CAM/BL1.14.VF/DAQ_CHANNEL,'AU','FL1HIDRAPP1 Virtual Focus Camera (IR) ROI readout'
677 -FLASH.LASER/MODBL.SENSORBOARD/PDTRIG_CAMP/DAQ_CHANNEL,'au','FL1PPL Energy channels'
678 -FLASH.LASER/MODBL.SPECT/CAMP_IR/DAQ_CHANNEL,'au','FL1PPL BL Table Spectrum'
679 -FLASH.LASER/HIDRAPP1.SPECTRUM_ANALYSIS/CAMP_IR/DAQ_CHANNEL,'au','FL1PPL Spectrum Analysis'
680 -FLASH.SYNC/LASER.LOCK.EXP/F1.PPL.OSC/FMC0.MD22.1.POSITION.RD,'ps','FL1PPL Optical Delay Line (act)'
681 -FLASH.SYNC/LASER.LOCK.EXP/F1.PPL.OSC/FMC0.MD22.1.POSITION_SET.WR,'ps','FL1PPL Optical Delay Line (set)'
682 -FLASH.SYNC/LASER.LOCK.EXP/F1.PPL.OSC/FMC0.MD22.1.ENCODER_POSITION.RD,'ps','FL1PPL Optical Delay Line (Encoder Readback)'
683 -FLASH.FEL/FLAPPBEAMLINES.MOTOR/CAMP_Delayline/FPOS,'ps','FL1PPL NIR delay BL1 table (act)'
684 -FLASH.FEL/FLAPPBEAMLINES.MOTOR/CAMP_Delayline/FPOS.SET,'ps','FL1PPL NIR delay BL1 table (set)'
685 -FLASH.FEL/FLAPPBEAMLINES.MOTOR/CAMP.ATT/FPOS,'degree','FL1PPL Transmission degree (act)'
686 -FLASH.FEL/FLAPPBEAMLINES.MOTOR/CAMP.ATT/FPOS.SET,'degree','FL1PPL Transmission degree (set)'
687 -FLASH.FEL/FLAPPBEAMLINES.MOTOR/Camp_Focus_Lens/FPOS,'mm','FL1PPL Focus Mirror Stage Position (act)'
688 -FLASH.FEL/FLAPPBEAMLINES.MOTOR/Camp_Focus_Lens/FPOS.SET,'mm','FL1PPL Focus Mirror Stage Position (set)'
689 -FLASH.LASER/MODBL.FEEDFWD/BL1_Att/INPUT.Y,'%','FL1PPL Transmission rate'
690 -FLASH.SYNC/LASER.LOCK.EXP/F1.PPL.OSC/CURRENT_INPUT_JITTER.RD,'fs','FL1PPL Sync. Jitter'
691 -FLASH.SYNC/LASER.LOCK.EXP/F1.PPL.OSC/LOCK_STATUS.VALUE.RD,'au','FL1PPL Sync. Status'
692 -
693 693  \\
694 694  
695 -\\
696 -
697 697  {{expand title="Parameters used until 2021"}}
698 698  {{code language="none"}}/FL1/Experiment/Pump probe laser/laser attenuation{{/code}}
699 699  
... ... @@ -740,6 +740,10 @@
740 740  
741 741  \\
742 742  
698 +\\
699 +
700 +\\
701 +
743 743  [[Contents>>doc:||anchor="Contents"]]
744 744  
745 745  \\
... ... @@ -1070,92 +1070,58 @@
1070 1070  {{/info}}
1071 1071  {{/expand}}
1072 1072  
1073 -\\
1074 -
1075 -====== **BAM FL0.DBC2**{{code language="none"}}{{/code}} ======
1076 -
1077 -(% style="color: rgb(255,102,0);" %)**DBC2**/electron bunch arrival time  (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL2/Electron Diagnostic/BAM/{{/code}}
1078 -
1079 -{{code language="none"}}/zraw/FLASH.SDIAG/BAM.DAQ/FL0.DBC2.ARRIVAL_TIME.ABSOLUTE.SA2.COMP/dGroup/{{/code}}
1080 -
1081 -//always saved (PBD)//
1082 -**FL0.DBC2**
1083 -(% style="color: rgb(0,0,0);" %)channel: FLASH.SDIAG/BAM/**FL0.DBC2**/ARRIVAL_TIME.ABSOLUTE.SA2.COMP
1084 -{{code language="none"}} DOOCS prop : FLASH.SDIAG/BAM//ARRIVAL_TIME.ABSOLUTE.SA2.COMPDAQ {{/code}}(% style="letter-spacing: 0.0px;" %)desc: Electron bunch arrival time measured with the BAM inside the accelerator (after bunch compressor 2). The property contains only the arrival time of the bunches sent to FL2 (e.g. if there are 30 bunches in FL2 the first 30 values are the arrival time the remaining numbers should be only 0). These are the same values as the "raw" data below - just "cleaned". The values show a very good correlation to the arrival time  of the XUV pulses in the experiment (see help).
1085 -units: fs (bigger numbers (typically) indicate later arrival times of the electrons).
1086 -
1087 -\\
1088 -
1089 -(% style="color: rgb(255,102,0);" %)DBC2/electron bunch arrival time (raw)  (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL2/Electron Diagnostic/BAM/{{/code}}
1090 -
1091 -{{code language="none"}}/zraw/FLASH.SDIAG/BAM.DAQ/FL0.DBC2.ARRIVAL_TIME.ABSOLUTE.SA2/dGroup/{{/code}}
1032 +(% style="color: rgb(255,102,0);" %)DBC2/electron bunch arrival time{{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
1092 1092  //always saved (PBD)//
1093 -{{code language="none"}}DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.ABSOLUTE{{/code}}
1094 -(% style="color: rgb(0,0,0);" %)FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.ABSOLUTE {{code language="none"}}DAQ channel: {{/code}}(%%)
1095 -desc: Electron bunch arrival time measured with the BAM inside the accelerator (after bunch compressor 2). Here the complete bunch train from the FEL is recorded (FLASH1 and FLASH2 pulses). Thus there are values from FLASH 2 in the second part. they may be separated by several "0" values if the reprate is different from 1 MHz ...  - It shows a very good correlation to the arrival time  of the XUV pulses in the experiment (see help). 
1034 +DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.absolute.SA2
1035 +DAQ channel: (% style="color: rgb(255,102,0);" %)FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.absolute.SA2(%%)
1036 +desc: Electron bunch arrival time measured with the BAM inside the accelerator (after bunch compressor 2) - It shows a very good correlation to the arrival time  of the XUV pulses in the experiment (see help).  The SA2 indicates the data is recorded for the second time slot at FLASH, typically used for FLASH2
1096 1096  units: fs (bigger numbers (typically) indicate later arrival times of the electrons).
1097 1097  
1098 1098  \\
1099 1099  
1100 -(% style="color: rgb(255,102,0);" %)DBC2/error (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL2/Electron Diagnostic/BAM/{{/code}}(%%)
1041 +(% style="color: rgb(255,102,0);" %)DBC2/error{{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
1101 1101  //always saved (PBD)//
1102 -(% style="color: rgb(0,0,0);" %)E.bamError{{code language="none"}}DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIM{{/code}}(%%)
1103 -(% style="color: rgb(0,0,0);" %)FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.BAMERROR{{code language="none"}}DAQ channel: {{/code}}(%%)
1043 +DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIM(% style="color: rgb(0,0,0);" %)E.bamError(%%)
1044 +DAQ channel: (% style="color: rgb(255,102,0);" %)FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.BAMERROR(%%)
1104 1104  desc: If the value is 0 , the BAM is working well. If it is non-zero there is a problem !!
1105 1105  
1106 1106  \\
1107 1107  
1108 -(% style="color: rgb(255,102,0);" %)DBC2/status  (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL2/Electron Diagnostic/BAM/{{/code}}(%%)
1049 +(% style="color: rgb(255,102,0);" %)DBC2/error{{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
1109 1109  //always saved (PBD)//
1110 -(% style="color: rgb(0,0,0);" %)E..bamStatus.//2//{{code language="none"}}DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIM{{/code}}(%%)
1111 -(% style="color: rgb(0,0,0);" %): FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.BAMSTATUS.2{{code language="none"}}DAQ channel{{/code}}(%%)
1051 +DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIM(% style="color: rgb(0,0,0);" %)E..bamStatus.//2//(%%)
1052 +DAQ channel: (% style="color: rgb(255,102,0);" %)FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.BAMSTATUS(%%)
1112 1112  desc: status bit: 0 - data is valid; 1 - beam present; 2 - calibration ongoing; 3 - feedback enabled; 4 - feedback acting;  mostly check for bit 0 == 1 is sufficient
1113 1113  
1114 1114  \\
1115 1115  
1116 -====== **BAM FL2.SEED5**{{code language="none"}}{{/code}} ======
1117 -
1118 -/FL2/Electron Diagnostic/BAM/**SEED5**(% style="color: rgb(255,102,0);" %)/electron bunch arrival time  (HDF5 name not yet implemented - see zraw)
1119 -
1120 -(% style="color: rgb(0,0,0);" %){{code language="none"}}/zraw/FLASH.SDIAG/BAM.DAQ/FL0.SEED5.ARRIVAL_TIME.ABSOLUTE.SA2.COMP/dGroup/{{/code}}
1121 -
1122 -//always saved (PBD)//
1123 -(% style="color: rgb(23,43,77);" %)**FL2.SEED5**(%%)
1124 -(% style="color: rgb(0,0,0);" %)channel: FLASH.SDIAG/BAM/(% style="color: rgb(0, 0, 0); color: rgb(23, 43, 77)" %)**FL2.SEED5**(% style="color: rgb(0,0,0);" %)/ARRIVAL_TIME.ABSOLUTE.SA1.COMP
1125 -{{code language="none"}} DOOCS prop : FLASH.SDIAG/BAM//ARRIVAL_TIME.ABSOLUTE.SA1.COMPDAQ {{/code}}(%%)desc: Electron bunch arrival time measured  with the BAM  before the undulator (pulse resolved data). This one was newly installed in 2020.. The property contains only the arrival time of the bunches sent to FL2 (e.g. if there are 30 bunches in FL2 the first 30 values are the arrival time the remaining numbers should be only 0). These are the same values as the "raw" data below - just "cleaned". The values show a very good correlation to the arrival time  of the XUV pulses in the experiment (see help).
1126 -units: fs (bigger numbers (typically) indicate later arrival times of the electrons).
1127 -
1128 -\\
1129 -
1130 -\\
1131 -
1132 -(% style="color: rgb(23,43,77);" %)SEED5(% style="color: rgb(255,102,0);" %)/electron bunch arrival time (raw) (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL2/Electron Diagnostic/BAM/{{/code}}
1133 -
1134 -(% style="color: rgb(0,0,0);" %){{code language="none"}}/zraw/FLASH.SDIAG/BAM.DAQ/FL0.SEED5.ARRIVAL_TIME.ABSOLUTE.SA2/dGroup/{{/code}}(%%)
1057 +(% style="color: rgb(23,43,77);" %)SEED5(% style="color: rgb(255,102,0);" %)/electron bunch arrival time{{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
1135 1135  //always saved (PBD)//
1136 -(% style="color: rgb(23,43,77);" %)**FL2.SEED5**{{code language="none"}}DOOCS prop : FLASH.SDIAG/BAM//ARRIVAL_TIME.ABSOLUTE{{/code}}(%%)
1137 -**~ **(% style="color: rgb(0,0,0);" %)FLASH.SDIAG/BAM/(% style="color: rgb(0, 0, 0); color: rgb(23, 43, 77)" %)**FL2.SEED5**(% style="color: rgb(0,0,0);" %)/ARRIVAL_TIME.ABSOLUTE {{code language="none"}}DAQ channel:{{/code}}(%%)
1138 -desc: Electron bunch arrival time measured  with the BAM  before the undulator (pulse resolved data). This one was newly installed in 2020. Here the complete bunch train from the FEL is recorded (FLASH1 and FLASH2 pulses). Thus there are values from FLASH 2 in the second part. they may be separated by several "0" values if the reprate is different from 1 MHz ...  - It shows a very good correlation to the arrival time  of the XUV pulses in the experiment (see help). 
1059 +DOOCS prop : FLASH.SDIAG/BAM/(% style="color: rgb(23,43,77);" %)FL2.SEED5(%%)/ARRIVAL_TIME.absolute.SA2
1060 +DAQ channel: (% style="color: rgb(255,102,0);" %)FLASH.SDIAG/BAM/(% style="color: rgb(255, 102, 0); color: rgb(23, 43, 77)" %)FL2.SEED5(% style="color: rgb(255,102,0);" %)/ARRIVAL_TIME.absolute.SA2(%%)
1061 +desc: Electron bunch arrival time measured  with the BAM  before the undulator (pulse resolved data). This one was newly installed in 2020.  The SA2 indicates the data is recorded for the first time slot at FLASH, typically used for FLASH2
1139 1139  units: fs (bigger numbers (typically) indicate later arrival times of the electrons).
1140 1140  
1141 1141  \\
1142 1142  
1143 -(% style="color: rgb(23,43,77);" %)SEED5(% style="color: rgb(255,102,0);" %)/error (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL2/Electron Diagnostic/BAM/{{/code}}(%%)
1066 +(% style="color: rgb(23,43,77);" %)SEED5(% style="color: rgb(255,102,0);" %)/error{{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
1144 1144  //always saved (PBD)//
1145 -(% style="color: rgb(23,43,77);" %)**FL2.SEED5**(% style="color: rgb(0,0,0);" %)E.bamError{{code language="none"}}DOOCS prop : FLASH.SDIAG/BAM//ARRIVAL_TIM{{/code}}(%%)
1146 -(% style="color: rgb(0,0,0);" %): FLASH.SDIAG/BAM/(% style="color: rgb(0, 0, 0); color: rgb(23, 43, 77)" %)**FL2.SEED5**(% style="color: rgb(0,0,0);" %)/ARRIVAL_TIME.BAMERROR{{code language="none"}}DAQ channel{{/code}}(%%)
1068 +DOOCS prop : FLASH.SDIAG/BAM/(% style="color: rgb(23,43,77);" %)FL2.SEED5(%%)/ARRIVAL_TIM(% style="color: rgb(0,0,0);" %)E.bamError(%%)
1069 +DAQ channel: (% style="color: rgb(255,102,0);" %)FLASH.SDIAG/BAM/(% style="color: rgb(255, 102, 0); color: rgb(23, 43, 77)" %)FL2.SEED5(% style="color: rgb(255,102,0);" %)/ARRIVAL_TIME.BAMERROR(%%)
1147 1147  desc: If the value is 0 , the BAM is working well. If it is non-zero there is a problem !!
1148 1148  
1149 1149  \\
1150 1150  
1151 -(% style="color: rgb(23,43,77);" %)SEED5(% style="color: rgb(255,102,0);" %)/status  (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL2/Electron Diagnostic/BAM/{{/code}}(%%)
1074 +(% style="color: rgb(23,43,77);" %)SEED5(% style="color: rgb(255,102,0);" %)/error{{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
1152 1152  //always saved (PBD)//
1153 -(% style="color: rgb(23,43,77);" %)**FL2.SEED5**(% style="color: rgb(0,0,0);" %)E.bamStatus.//2//{{code language="none"}}DOOCS prop : FLASH.SDIAG/BAM//ARRIVAL_TIM{{/code}}(%%)
1154 -(% style="color: rgb(0,0,0);" %)el: FLASH.SDIAG/BAM/(% style="color: rgb(0, 0, 0); color: rgb(23, 43, 77)" %)**FL2.SEED5**(% style="color: rgb(0,0,0);" %)/ARRIVAL_TIME.BAMSTATUS.2{{code language="none"}}DAQ chann{{/code}}(%%)
1076 +DOOCS prop : FLASH.SDIAG/BAM/(% style="color: rgb(23,43,77);" %)FL2.SEED5(%%)/ARRIVAL_TIM(% style="color: rgb(0,0,0);" %)E..bamStatus.//2//(%%)
1077 +DAQ channel: (% style="color: rgb(255,102,0);" %)FLASH.SDIAG/BAM/(% style="color: rgb(255, 102, 0); color: rgb(23, 43, 77)" %)FL2.SEED5(% style="color: rgb(255,102,0);" %)/ARRIVAL_TIME.BAMSTATUS(%%)
1155 1155  desc: status bit: 0 - data is valid; 1 - beam present; 2 - calibration ongoing; 3 - feedback enabled; 4 - feedback acting;  mostly check for bit 0 == 1 is sufficient
1156 1156  
1157 1157  \\
1158 1158  
1082 +\\
1083 +
1159 1159  [[Contents>>doc:||anchor="Contents"]]
1160 1160  
1161 1161  \\
... ... @@ -1282,92 +1282,7 @@
1282 1282  
1283 1283  There may be more information available from the "Laser DAQ". laese contact your Laser Local Contact.
1284 1284  
1285 -\\
1286 1286  
1287 -**User delay**
1288 -
1289 -Delay (set value):
1290 -
1291 -{{code language="none"}}FLASH.SYNC/LASER.LOCK.EXP/F2.PPL.OSC/FMC0.MD22.0.POSITION_SET.WR{{/code}}
1292 -
1293 -Delay (encoder readback):
1294 -
1295 -{{code language="none"}}FLASH.SYNC/LASER.LOCK.EXP/F2.PPL.OSC/FMC0.MD22.0.POSITION.RD{{/code}}
1296 -
1297 -OXC. jitter:
1298 -
1299 -{{code language="none"}}FLASH.SYNC/LASER.LOCK.EXP/F2.PPL.OSC/CURRENT_INPUT_JITTER.RD{{/code}}
1300 -
1301 -\\
1302 -
1303 -**Pulse resolved energy:**
1304 -
1305 -OPCPA output (photodiode signal raw ADC trace 16000 samples):
1306 -
1307 -{{code language="none"}}/zraw/FLASH.LASER/FLASH2CPUULGAN1.ADCSCOPE/CH23.TD/dGroup{{/code}}
1308 -
1309 -(% style="letter-spacing: 0.0px;" %)Upper breadboard Photodiode (THG) burst (photodiode signal raw ADC trace 16000 samples)::
1310 -
1311 -{{code language="none"}}/zraw/FLASH.LASER/FLASH2CPUULGAN1.ADCSCOPE/CH26.TD/dGroup{{/code}}
1312 -
1313 -Upper breadboard Photodiode (THG) energy (analyzed signal. integration over pulses in the ADC trace. contains for each laser pulse the pulse energy in a.u.)
1314 -
1315 -{{code language="none"}}/zraw/FLASH.LASER/MOD24.PES/FL24_userPD/dGroup{{/code}}
1316 -
1317 -\\
1318 -
1319 -**LAM (Laser Arrivaltime Monitor)  pulse resolved data:**
1320 -
1321 -Signal of Photodiode1  - for experts only... (analyzed signal. integration over pulses in the ADC trace. )
1322 -
1323 -{{code language="none"}}/zraw/FLASH.LASER/MOD24.PES/LAM.PD1/dGroup{{/code}}
1324 -
1325 -Signal of Photodiode2  - for experts only...  (analyzed signal. integration over pulses in the ADC trace.)
1326 -
1327 -{{code language="none"}}/zraw/FLASH.LASER/MOD24.PES/LAM.PD2/dGroup{{/code}}
1328 -
1329 -"Actual" LAM Signal - to be calibrated ......  (analyzed signal. integration over pulses in the ADC trace.)
1330 -
1331 -{{code language="none"}}/zraw/FLASH.LASER/MOD24.PES/LAM.PDBAL/dGroup{{/code}}
1332 -
1333 -\\
1334 -
1335 -**Attenuator angle:**
1336 -
1337 -{{code language="none"}}FLASH.FEL/FLAPP2BEAMLINES/MOTOR1.FL24/FPOS{{/code}}
1338 -
1339 -**Polarization control:**
1340 -
1341 -{{code language="none"}}FLASH.FEL/FLAPP2BEAMLINES/MOTOR14.FL24/FPOS{{/code}}
1342 -
1343 -**SysDC delay error:**
1344 -
1345 -{{code language="none"}}FLASH.LASER/ULGAN1.DYNPROP/TCFIBER.DOUBLES/DOUBLE26{{/code}}
1346 -
1347 -\\
1348 -
1349 -**Timing error: (these two need to be observed and both=0 means no error)**
1350 -
1351 -{{code language="none"}}FLASH/CPUULGAN1.TIMING/ULGAN1/dT_alarm{{/code}}
1352 -
1353 -{{code language="none"}}FLASH/CPUULGAN1.TIMING/ULGAN1/dMPN{{/code}}
1354 -
1355 -**Laser error status:**
1356 -
1357 -\\
1358 -
1359 -**Virtual camera X and Y history, beam size: (use slow data)**
1360 -
1361 -{{code language="none"}}FLASH.LASER/MOD24.BEAMPOS/UV.VF_BP/CENTER.X{{/code}}
1362 -
1363 -{{code language="none"}}FLASH.LASER/MOD24.BEAMPOS/UV.VF_BP/CENTER.Y{{/code}}
1364 -
1365 -{{code language="none"}}FLASH.LASER/MOD24.CAM/UV.14.VF/ROI_SPECTRUM.X.SIG{{/code}}
1366 -
1367 -\\
1368 -
1369 -{{expand title="Parameters used until 2021"}}
1370 -
1371 1371  {{code language="none"}}/FL2/Experiment/Pump probe laser/FL24/attenuator position{{/code}}//always saved (PBD2)//
1372 1372  DOOCS prop : {{code language="none"}}FLASH.FEL/FLAPP2BEAMLINES/MOTOR1.FL24/FPOS{{/code}}
1373 1373  DAQ channel: {{code language="none"}}FLASH.FEL/FLAPP2BEAMLINES/MOTOR1.FL24/FPOS{{/code}}
... ... @@ -1400,7 +1400,6 @@
1400 1400  DAQ channel: {{code language="none"}}FLASH.SYNC/LASER.LOCK.EXP/FLASH2.PPL1.OSC1/CURRENT_INPUT_JITTER.RD{{/code}}
1401 1401  desc: rms jitter of the fs-Oscillator
1402 1402  units: fs
1403 -{{/expand}}
1404 1404  
1405 1405  [[Contents>>doc:||anchor="Contents"]]
1406 1406