Changes for page The FLASH HDF5 structure

Last modified by sndueste on 2025/02/06 10:55
From version 77.1
edited by sndueste
on 2023/05/17 11:58
Change comment: There is no comment for this version
To version 57.1
edited by sndueste
on 2022/09/07 09:50
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -79,10 +79,12 @@
79 79  {{/layout-cell}}
80 80  
81 81  {{layout-cell}}
82 -* The //average// FEL pulse energy as example for the **slow** **data**. Here the data is not saved with 10 Hz  - thus not for every FEL pulse train.  The data is typically saved with 1 Hz if the values are changing (like the FEL energy) and every about 20 sec if there is no change for longer time ( e.g. motor set values). Thus to use the data together with the "fast" one, one has to interpolate the data as explained in the examples in the repos below show (e.g. {{code language="none"}}df['GMD_T_average'] = df['GMD_T_average'].interpolate(method='linear'){{/code}})
82 +* The //average// FEL pulse energy as example for the **slow** **data** (different e.g. 1 Hz):
83 83  
84 - ( as example only every 10th train ID is listed in the HDF group "index")
84 + ( every 10th train ID is listed in the HDF group "index")
85 85  
86 +\\
87 +
86 86  [[image:attach:image2020-11-16_15-31-45.png||height="250"]]
87 87  {{/layout-cell}}
88 88  
... ... @@ -113,8 +113,6 @@
113 113  
114 114  {{layout-section ac:type="single"}}
115 115  {{layout-cell}}
116 -
117 -
118 118  == Complete list of recordable parameters ==
119 119  
120 120  The complete list for the relation between DOOCS names and HDF5 names for the recordable parameters can be found in [[DESY's Repository~[~[image:url:http://hasfweb.desy.de/pub/TWiki/TWikiDocGraphics/external-link.gif~|~|width="13" height="12"~]~]>>url:https://stash.desy.de/projects/CS/repos/pah/browse/src/camp/data/channel2HdfName.dat||shape="rect"]].
... ... @@ -419,10 +419,9 @@
419 419  arrival time (BAM) =====
420 420  
421 421  {{info title="BAM information: updates 2022"}}
422 -* see: [[Info collection about the BAMs and how to use the BAM data>>url:https://confluence.desy.de/display/FLASHUSER/Info+collection+for+the+BAM||shape="rect"]]
423 423  * The data format of the BAM has been completely altered in the 2022 shutdown
424 424  * before 2022 BAMs were always saving the arrival time information for each 1µs bucked regardless if there were electrons in the accelerator or not. IN addition the arrival times for  FL1 and FL2 were saved in the same parameter ...
425 -* THIS is now different. There are new parameters saving only the arrival times for pulses that go to FL1 and to FL2 (in detail: first time slot of the accelerator and second)
424 +* THIS is now different. there are new parameters for pulses that go to FL1 and to FL2 (in detail: first time slot of the accelerator and second)
426 426  * There has been also a renaming  (and relocation) of the BAMs.
427 427  ** acc:  4DBC3 → FL0.DBC2
428 428  ** FL1: 1SFELC →  FL1.SFELC
... ... @@ -444,94 +444,41 @@
444 444  desc: Electron bunch arrival time measured with the BAM inside the accelerator - however shows a very good correlation to the arrivaltime  of the XUV pulses in the experiment (pulse resolved data).
445 445  units: ps (bigger numbers indicate later arrivaltime of the electrons)
446 446  
447 -\\
448 -
449 449  {{code language="none"}}/FL1/Electron Diagnostic/BAM/1SFELC/electron bunch arrival time (low charge){{/code}}
450 450  //always saved (PBD)//
451 451  DOOCS prop : {{code language="none"}}FLASH.SDIAG/BAM/1SFELC/LOW_CHARGE_ARRIVAL_TIME{{/code}}
452 452  DAQ channel: {{code language="none"}}FLASH.SDIAG/BAM.DAQ/1SFELC.LOW_CHARGE_ARRIVAL_TIME{{/code}}
453 453  desc: Electron bunch arrival time measured with the BAM  before the undulator (pulse resolved data). This one was newly installed in 2020.
454 -units: ps (bigger numbers indicate later arrival time of the electrons)
451 +units: ps (bigger numbers indicate later arrivaltime of the electrons)
455 455  {{/expand}}
456 456  
457 -====== **BAM FL0.DBC2**{{code language="none"}}{{/code}} ======
458 -
459 -(% style="color: rgb(255,102,0);" %)**DBC2**/electron bunch arrival time  (HDF5 name not yet implemented - see zraw)(%%)
460 -//always saved (PBD)//
461 -{{code language="none"}}/FL1/Electron Diagnostic/BAM/ {{/code}}DOOCS prop : FLASH.SDIAG/BAM/**FL0.DBC2**/ARRIVAL_TIME.ABSOLUTE.SA1.COMP
462 -DAQ (% style="color: rgb(0,0,0);" %)channel: FLASH.SDIAG/BAM/**FL0.DBC2**/ARRIVAL_TIME.ABSOLUTE.SA1.COMP (%%)
463 -desc: Electron bunch arrival time measured with the BAM inside the accelerator (after bunch compressor 2). The property contains only the arrival time of the bunches sent to FL1 (e.g. if there are 30 bunches in FL1 the first 30 values are the arrival time the remaining numbers  still may have arbitrary numbers looking like a signal which they are not ). These are the same values as the "raw" data below - just "cleaned". The values show a very good correlation to the arrival time  of the XUV pulses in the experiment (see help).
464 -
465 -units: fs (bigger numbers (typically) indicate later arrival times of the electrons).
466 -
467 467  \\
468 468  
469 -(% style="color: rgb(255,102,0);" %)DBC2/electron bunch arrival time (raw)  (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
456 +{{code language="none"}}/FL1/Electron Diagnostic/BAM/4DBC3/electron bunch arrival time (low charge){{/code}}
470 470  //always saved (PBD)//
471 -DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.ABSOLUTE
472 -DAQ channel: (% style="color: rgb(0,0,0);" %)FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.ABSOLUTE (%%)
473 -desc: Electron bunch arrival time measured with the BAM inside the accelerator (after bunch compressor 2). Here the complete bunch train from the FEL is recorded (FLASH1 and FLASH2 pulses). Thus there are values from FLASH 1 in the first part. they may be separated by several "0" values if the reprate is different from 1 MHz ...  - It shows a very good correlation to the arrival time  of the XUV pulses in the experiment (see help). 
474 -units: fs (bigger numbers (typically) indicate later arrival times of the electrons).
458 +DOOCS prop : {{code language="none"}}FLASH.SDIAG/BAM/4DBC3/LOW_CHARGE_ARRIVAL_TIME{{/code}}
459 +DAQ channel: {{code language="none"}}FLASH.SDIAG/BAM.DAQ/4DBC3.LOW_CHARGE_ARRIVAL_TIME{{/code}}
460 +desc: Electron bunch arrival time measured with the BAM inside the accelerator - however shows a very good correlation to the arrivaltime  of the XUV pulses in the experiment (pulse resolved data).
461 +units: ps (bigger numbers indicate later arrivaltime of the electrons)
475 475  
476 -\\
477 -
478 -(% style="color: rgb(255,102,0);" %)DBC2/error (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
463 +{{code language="none"}}/FL1/Electron Diagnostic/BAM/1SFELC/electron bunch arrival time (low charge){{/code}}
479 479  //always saved (PBD)//
480 -DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIM(% style="color: rgb(0,0,0);" %)E.bamError(%%)
481 -DAQ channel: (% style="color: rgb(0,0,0);" %)FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.BAMERROR(%%)
482 -desc: If the value is 0 , the BAM is working well. If it is non-zero there is a problem !!
465 +DOOCS prop : {{code language="none"}}FLASH.SDIAG/BAM/1SFELC/LOW_CHARGE_ARRIVAL_TIME{{/code}}
466 +DAQ channel: {{code language="none"}}FLASH.SDIAG/BAM.DAQ/1SFELC.LOW_CHARGE_ARRIVAL_TIME{{/code}}
467 +desc: Electron bunch arrival time measured with the BAM  before the undulator (pulse resolved data). This one was newly installed in 2020.
468 +units: ps (bigger numbers indicate later arrivaltime of the electrons)
483 483  
484 484  \\
485 485  
486 -(% style="color: rgb(255,102,0);" %)DBC2/status  (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
487 -//always saved (PBD)//
488 -DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIM(% style="color: rgb(0,0,0);" %)E..bamStatus.//1//(%%)
489 -DAQ channel(% style="color: rgb(0,0,0);" %): FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.BAMSTATUS.1(%%)
490 -desc: (% style="letter-spacing: 0.0px;" %) status bit: 0 - data is valid; 1 - beam present; 2 - calibration ongoing; 3 - feedback enabled; 4 - feedback acting;  mostly check for bit 0 == 1 is sufficient
472 +{{info title="BAM hints"}}
473 +* besides the arrivaltime from FLASH1 there is also the FLASH2/3 electron arrival time saved.In case of doubt ask your local contact
474 +* [[Link a collection of papers related to the BAM and the analysis of pump-probe experiments >>doc:FLASHUSER.Additional helpful things.FLASH beamlines and instruments references.WebHome]]
475 +* [[LINK to detailed infos from MSK>>url:https://confluence.desy.de/display/SDiagPublic/BAM+Data+Structure||shape="rect"]]
476 +* a recent  [[talk about the working principle of the BAM>>attach:BAM-basics and outlook-2018_DESY-template_16-9Format.pdf]]
477 +{{/info}}
491 491  
492 492  \\
493 493  
494 -====== **BAM FL1.SFELC**{{code language="none"}}{{/code}} ======
495 -
496 -(% style="font-family: SFMono-Medium , ~"SF Mono~" , ~"Segoe UI Mono~" , ~"Roboto Mono~" , ~"Ubuntu Mono~" , Menlo , Courier , monospace;letter-spacing: 0.0px;" %)/FL1/Electron Diagnostic/BAM/**SFELC**(% style="color: rgb(255,102,0);" %)/electron bunch arrival time  (HDF5 name not yet implemented - see zraw)
497 -
498 -//always saved (PBD)//
499 -(% style="color: rgb(23,43,77);" %)**FL1.SFELC**(%%)
500 -(% style="color: rgb(0,0,0);" %)channel: FLASH.SDIAG/BAM/(% style="color: rgb(0, 0, 0); color: rgb(23, 43, 77)" %)FL1.SFELC(% style="color: rgb(0,0,0);" %)/ARRIVAL_TIME.ABSOLUTE.SA1.COMP
501 -{{code language="none"}} DOOCS prop : FLASH.SDIAG/BAM//ARRIVAL_TIME.ABSOLUTE.SA1.COMPDAQ {{/code}}(% style="letter-spacing: 0.0px;" %)desc: Electron bunch arrival time measured  with the BAM  before the undulator (pulse resolved data). This one was newly installed in 2020.. The property contains only the arrival time of the bunches sent to FL1 (e.g. if there are 30 bunches in FL1 the first 30 values are the arrival time the remaining numbers still may have arbitrary numbers looking like a signal which they are not). These are the same values as the "raw" data below - just "cleaned". The values show a very good correlation to the arrival time  of the XUV pulses in the experiment (see help).
502 -units: fs (bigger numbers (typically) indicate later arrival times of the electrons).
503 -
504 -\\
505 -
506 -\\
507 -
508 -(% style="color: rgb(23,43,77);" %)SFELC(% style="color: rgb(255,102,0);" %)/electron bunch arrival time (raw) (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
509 -//always saved (PBD)//
510 -DOOCS prop : FLASH.SDIAG/BAM/(% style="color: rgb(23,43,77);" %)FL1.SFELC(%%)/ARRIVAL_TIME.ABSOLUTE
511 -DAQ channel:** **(% style="color: rgb(0,0,0);" %)FLASH.SDIAG/BAM/FL1.SFELC/ARRIVAL_TIME.ABSOLUTE (%%)
512 -desc: Electron bunch arrival time measured  with the BAM  before the undulator (pulse resolved data). This one was newly installed in 2020. Here the complete bunch train from the FEL is recorded (FLASH1 and FLASH2 pulses). Thus there are values from FLASH 1 in the first part. they may be separated by several "0" values if the reprate is different from 1 MHz ...  - It shows a very good correlation to the arrival time  of the XUV pulses in the experiment (see help). 
513 -units: fs (bigger numbers (typically) indicate later arrival times of the electrons).
514 -
515 -\\
516 -
517 -(% style="color: rgb(23,43,77);" %)SFELC(% style="color: rgb(255,102,0);" %)/error (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
518 -//always saved (PBD)//
519 -DOOCS prop : FLASH.SDIAG/BAM/(% style="color: rgb(23,43,77);" %)FL1.SFELC(%%)/ARRIVAL_TIM(% style="color: rgb(0,0,0);" %)E.bamError(%%)
520 -DAQ channel(% style="color: rgb(0,0,0);" %): FLASH.SDIAG/BAM/FL1.SFELC/ARRIVAL_TIME.BAMERROR(%%)
521 -desc: If the value is 0 , the BAM is working well. If it is non-zero there is a problem !!
522 -
523 -\\
524 -
525 -(% style="color: rgb(23,43,77);" %)SFELC(% style="color: rgb(255,102,0);" %)/status  (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL1/Electron Diagnostic/BAM/{{/code}}(%%)
526 -//always saved (PBD)//
527 -DOOCS prop : FLASH.SDIAG/BAM/(% style="color: rgb(23,43,77);" %)FL1.SFELC(%%)/ARRIVAL_TIM(% style="color: rgb(0,0,0);" %)E..bamStatus.//1//(%%)
528 -DAQ chann(% style="color: rgb(0,0,0);" %)el: FLASH.SDIAG/BAM/FL1.SFELC/ARRIVAL_TIME.BAMSTATUS.1(%%)
529 -desc: status bit: 0 - data is valid; 1 - beam present; 2 - calibration ongoing; 3 - feedback enabled; 4 - feedback acting;  mostly check for bit 0 == 1 is sufficient
530 -
531 -\\
532 -
533 -\\
534 -
535 535  ===== electron beam profile =====
536 536  
537 537  {{code language="none"}}/FL1/Electron Diagnostic/Electron bunch profile/TDS profile{{/code}}
... ... @@ -602,11 +602,11 @@
602 602  
603 603  ===== set number of pulses =====
604 604  
605 -(% style="color: rgb(255, 0, 0); color: rgb(255, 102, 0)" %)(HDF5 name not yet implemented - see zraw)(% style="color: rgb(255,0,0);" %){{code language="none"}}/FL1/Timing/set number of bunches {{/code}}(%%)
551 +{{code language="none"}}/FL1/Timing/set number of bunches{{/code}}
606 606  //always saved (PBD)//
607 -DOOCS prop : {{code language="none"}}FLASH.DIAG/TIMINGINFO/TIME1.BUNCH_FIRST_INDEX.1 [4th number]{{/code}}
608 -DAQ channel: {{code language="none"}}FLASH.DIAG/TIMINGINFO/TIME1.BUNCH_FIRST_INDEX.1 [4th number]{{/code}}
609 -desc: Number of bunches set in the control (timing) system.  The property contains 4 numbers. the last one is the number of pulses (see also [[doc:FLASH.Timing properties]] (internal link)).  If pulses are used for diagnostic of the protection system of the accelerator limits the number of bunches to be accelerated and thus the actual number of pulses may be smaller than the set one 
553 +DOOCS prop : {{code language="none"}}FLASH.DIAG/TOROID.ML/3GUN/NUMBEROFBUNCHES.FLASH1{{/code}}
554 +DAQ channel: {{code language="none"}}TTF2.UTIL/LASER.CONTROL/GUN/PULSE_NUM{{/code}}
555 +desc: Number of pulses set at the gun (FLASH1)
610 610  units:
611 611  
612 612  ===== actual number of pulses =====
... ... @@ -658,43 +658,6 @@
658 658  
659 659  ==== Pump Probe Laser (FLASH1) ====
660 660  
661 -**PIGLET (PG laser)**
662 -
663 -**{{code language="none"}}/FL1/Experiment/Pump probe laser{{/code}}**
664 -
665 -FLASH.LASER/FLACPUPGLASER1.PULSEENERGY/DIAG1out/PULSEENERGY.MEAN 
666 -FLASH.LASER/FLACPUPGLASER1.PULSEENERGY/PG1_incoupl/PULSEENERGY.MEAN 
667 -FLASH.LASER/FLACPUPGLASER1.PULSEENERGY/PG2_incoupl/PULSEENERGY.MEAN 
668 -FLASH.SYNC/LASER.LOCK.EXP/FLASH1.MOD1.PG.OSC/FMC0.MD22.1.ENCODER_POSITION.RD 
669 -FLASH.SYNC/LASER.LOCK.EXP/FLASH1.MOD1.PG.OSC/FMC0.MD22.1.ENCODER_POSITION_RAW.RD 
670 -FLASH.SYNC/LASER.LOCK.EXP/FLASH1.MOD1.PG.OSC/FMC0.MD22.1.POSITION.RD
671 -
672 -**BL - Hidra laser **
673 -
674 -Property,Units,Description
675 -FLASH.LASER/MODBL.CAM/BL1.13.AC/DAQ_CHANNEL,'AU','FL1HIDRAPP1 Autocorrelation (IR) ROI readout'
676 -FLASH.LASER/MODBL.CAM/BL1.14.VF/DAQ_CHANNEL,'AU','FL1HIDRAPP1 Virtual Focus Camera (IR) ROI readout'
677 -FLASH.LASER/MODBL.SENSORBOARD/PDTRIG_CAMP/DAQ_CHANNEL,'au','FL1PPL Energy channels'
678 -FLASH.LASER/MODBL.SPECT/CAMP_IR/DAQ_CHANNEL,'au','FL1PPL BL Table Spectrum'
679 -FLASH.LASER/HIDRAPP1.SPECTRUM_ANALYSIS/CAMP_IR/DAQ_CHANNEL,'au','FL1PPL Spectrum Analysis'
680 -FLASH.SYNC/LASER.LOCK.EXP/F1.PPL.OSC/FMC0.MD22.1.POSITION.RD,'ps','FL1PPL Optical Delay Line (act)'
681 -FLASH.SYNC/LASER.LOCK.EXP/F1.PPL.OSC/FMC0.MD22.1.POSITION_SET.WR,'ps','FL1PPL Optical Delay Line (set)'
682 -FLASH.SYNC/LASER.LOCK.EXP/F1.PPL.OSC/FMC0.MD22.1.ENCODER_POSITION.RD,'ps','FL1PPL Optical Delay Line (Encoder Readback)'
683 -FLASH.FEL/FLAPPBEAMLINES.MOTOR/CAMP_Delayline/FPOS,'ps','FL1PPL NIR delay BL1 table (act)'
684 -FLASH.FEL/FLAPPBEAMLINES.MOTOR/CAMP_Delayline/FPOS.SET,'ps','FL1PPL NIR delay BL1 table (set)'
685 -FLASH.FEL/FLAPPBEAMLINES.MOTOR/CAMP.ATT/FPOS,'degree','FL1PPL Transmission degree (act)'
686 -FLASH.FEL/FLAPPBEAMLINES.MOTOR/CAMP.ATT/FPOS.SET,'degree','FL1PPL Transmission degree (set)'
687 -FLASH.FEL/FLAPPBEAMLINES.MOTOR/Camp_Focus_Lens/FPOS,'mm','FL1PPL Focus Mirror Stage Position (act)'
688 -FLASH.FEL/FLAPPBEAMLINES.MOTOR/Camp_Focus_Lens/FPOS.SET,'mm','FL1PPL Focus Mirror Stage Position (set)'
689 -FLASH.LASER/MODBL.FEEDFWD/BL1_Att/INPUT.Y,'%','FL1PPL Transmission rate'
690 -FLASH.SYNC/LASER.LOCK.EXP/F1.PPL.OSC/CURRENT_INPUT_JITTER.RD,'fs','FL1PPL Sync. Jitter'
691 -FLASH.SYNC/LASER.LOCK.EXP/F1.PPL.OSC/LOCK_STATUS.VALUE.RD,'au','FL1PPL Sync. Status'
692 -
693 -\\
694 -
695 -\\
696 -
697 -{{expand title="Parameters used until 2021"}}
698 698  {{code language="none"}}/FL1/Experiment/Pump probe laser/laser attenuation{{/code}}
699 699  
700 700  //always saved (PBD)//
... ... @@ -736,7 +736,6 @@
736 736  DOOCS prop : {{code language="none"}}TTF2.FEL/TDOLFEL/TDOLFEL/STREAK.CAM.TIME{{/code}}
737 737  DOOCS prop : {{code language="none"}}TTF2.FEL/TDOLFEL/TDOLFEL/STREAK.CAM.TIME{{/code}}
738 738  desc: delay time between the optical laser and the FEL units: ps
739 -{{/expand}}
740 740  
741 741  \\
742 742  
... ... @@ -1023,27 +1023,8 @@
1023 1023  The gap values are saved for all 12 undulators (Nr 3 to 14). Undulator 14 is the one closest to the experimental hall.
1024 1024  
1025 1025  =====
1026 -arrival time (BAM) =====
934 +arrival time =====
1027 1027  
1028 -{{info title="BAM information: updates 2022"}}
1029 -* see: [[Info collection about the BAMs and how to use the BAM data>>url:https://confluence.desy.de/display/FLASHUSER/Info+collection+for+the+BAM||shape="rect"]]
1030 -* The data format of the BAM has been completely altered in the 2022 shutdown
1031 -* before 2022 BAMs were always saving the arrival time information for each 1µs bucked regardless if there were electrons in the accelerator or not. I addition the arrival times for  FL1 and FL2 were saved in the same parameter ...
1032 -* THIS is now different. There are new parameters saving only the arrival times for pulses that go to FL1 and to FL2 (in detail: first time slot of the accelerator and second)
1033 -* There has been also a renaming  (and relocation) of the BAMs.
1034 -** acc:  4DBC3 → FL0.DBC2
1035 -** FL1: 1SFELC →  FL1.SFELC
1036 -** FL2: 8FL2XTDS → (% style="color: rgb(23,43,77);" %)FL2.SEED5
1037 -* for more Info: [[LINK to detailed infos from MSK>>url:https://confluence.desy.de/display/SDiagPublic/BAM+Data+Structure||shape="rect"]]
1038 -* [[Link a collection of papers related to the BAM and the analysis of pump-probe experiments>>doc:FLASHUSER.Additional helpful things.FLASH beamlines and instruments references.WebHome]]
1039 -* a recent  [[talk about the working principle of the BAM>>attach:BAM-basics and outlook-2018_DESY-template_16-9Format.pdf]]
1040 -{{/info}}
1041 -
1042 -\\
1043 -
1044 -{{expand title="Discontinued BAM format (used until end 2021)"}}
1045 -(% style="color: rgb(0,0,0);" %)**Discontinued BAM data recording **
1046 -
1047 1047  {{code language="none"}}/FL2/Electron Diagnostic/BAM/8FL2XTDS/electron bunch arrival time (low charge){{/code}}
1048 1048  //always saved (PBD2)//
1049 1049  DOOCS prop : {{code language="none"}}FLASH.SDIAG/BAM/8FL2XTDS/LOW_CHARGE_ARRIVAL_TIME{{/code}}
... ... @@ -1068,94 +1068,8 @@
1068 1068  * [[LINK to detailed infos from MSK (may only work inside DESY network~[~[image:url:http://hasfweb.desy.de/pub/TWiki/TWikiDocGraphics/external-link.gif~|~|width="13" height="12"~]~]>>url:http://www.desy.de/~~mbock/pages/BAM_daq_channel_descriptions.html||shape="rect"]]
1069 1069  * a recent  [[talk about the working principle of the BAM>>attach:BAM-basics and outlook-2018_DESY-template_16-9Format.pdf]]
1070 1070  {{/info}}
1071 -{{/expand}}
1072 1072  
1073 -\\
1074 1074  
1075 -====== **BAM FL0.DBC2**{{code language="none"}}{{/code}} ======
1076 -
1077 -(% style="color: rgb(255,102,0);" %)**DBC2**/electron bunch arrival time  (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL2/Electron Diagnostic/BAM/{{/code}}
1078 -
1079 -{{code language="none"}}/zraw/FLASH.SDIAG/BAM.DAQ/FL0.DBC2.ARRIVAL_TIME.ABSOLUTE.SA2.COMP/dGroup/{{/code}}
1080 -
1081 -//always saved (PBD)//
1082 -**FL0.DBC2**
1083 -(% style="color: rgb(0,0,0);" %)channel: FLASH.SDIAG/BAM/**FL0.DBC2**/ARRIVAL_TIME.ABSOLUTE.SA2.COMP
1084 -{{code language="none"}} DOOCS prop : FLASH.SDIAG/BAM//ARRIVAL_TIME.ABSOLUTE.SA2.COMPDAQ {{/code}}(% style="letter-spacing: 0.0px;" %)desc: Electron bunch arrival time measured with the BAM inside the accelerator (after bunch compressor 2). The property contains only the arrival time of the bunches sent to FL2 (e.g. if there are 30 bunches in FL2 the first 30 values are the arrival time the remaining numbers still may have arbitrary numbers looking like a signal which they are not0). These are the same values as the "raw" data below - just "cleaned". The values show a very good correlation to the arrival time  of the XUV pulses in the experiment (see help).
1085 -units: fs (bigger numbers (typically) indicate later arrival times of the electrons).
1086 -
1087 -\\
1088 -
1089 -(% style="color: rgb(255,102,0);" %)DBC2/electron bunch arrival time (raw)  (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL2/Electron Diagnostic/BAM/{{/code}}
1090 -
1091 -{{code language="none"}}/zraw/FLASH.SDIAG/BAM.DAQ/FL0.DBC2.ARRIVAL_TIME.ABSOLUTE.SA2/dGroup/{{/code}}
1092 -//always saved (PBD)//
1093 -{{code language="none"}}DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.ABSOLUTE{{/code}}
1094 -(% style="color: rgb(0,0,0);" %)FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.ABSOLUTE {{code language="none"}}DAQ channel: {{/code}}(%%)
1095 -desc: Electron bunch arrival time measured with the BAM inside the accelerator (after bunch compressor 2). Here the complete bunch train from the FEL is recorded (FLASH1 and FLASH2 pulses). Thus there are values from FLASH 2 in the second part. they may be separated by several "0" values if the reprate is different from 1 MHz ...  - It shows a very good correlation to the arrival time  of the XUV pulses in the experiment (see help). 
1096 -units: fs (bigger numbers (typically) indicate later arrival times of the electrons).
1097 -
1098 -\\
1099 -
1100 -(% style="color: rgb(255,102,0);" %)DBC2/error (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL2/Electron Diagnostic/BAM/{{/code}}(%%)
1101 -//always saved (PBD)//
1102 -(% style="color: rgb(0,0,0);" %)E.bamError{{code language="none"}}DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIM{{/code}}(%%)
1103 -(% style="color: rgb(0,0,0);" %)FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.BAMERROR{{code language="none"}}DAQ channel: {{/code}}(%%)
1104 -desc: If the value is 0 , the BAM is working well. If it is non-zero there is a problem !!
1105 -
1106 -\\
1107 -
1108 -(% style="color: rgb(255,102,0);" %)DBC2/status  (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL2/Electron Diagnostic/BAM/{{/code}}(%%)
1109 -//always saved (PBD)//
1110 -(% style="color: rgb(0,0,0);" %)E..bamStatus.//2//{{code language="none"}}DOOCS prop : FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIM{{/code}}(%%)
1111 -(% style="color: rgb(0,0,0);" %): FLASH.SDIAG/BAM/FL0.DBC2/ARRIVAL_TIME.BAMSTATUS.2{{code language="none"}}DAQ channel{{/code}}(%%)
1112 -desc: status bit: 0 - data is valid; 1 - beam present; 2 - calibration ongoing; 3 - feedback enabled; 4 - feedback acting;  mostly check for bit 0 == 1 is sufficient
1113 -
1114 -\\
1115 -
1116 -====== **BAM FL2.SEED5**{{code language="none"}}{{/code}} ======
1117 -
1118 -/FL2/Electron Diagnostic/BAM/**SEED5**(% style="color: rgb(255,102,0);" %)/electron bunch arrival time  (HDF5 name not yet implemented - see zraw)
1119 -
1120 -(% style="color: rgb(0,0,0);" %){{code language="none"}}/zraw/FLASH.SDIAG/BAM.DAQ/FL0.SEED5.ARRIVAL_TIME.ABSOLUTE.SA2.COMP/dGroup/{{/code}}
1121 -
1122 -//always saved (PBD)//
1123 -(% style="color: rgb(23,43,77);" %)**FL2.SEED5**(%%)
1124 -(% style="color: rgb(0,0,0);" %)channel: FLASH.SDIAG/BAM/(% style="color: rgb(0, 0, 0); color: rgb(23, 43, 77)" %)**FL2.SEED5**(% style="color: rgb(0,0,0);" %)/ARRIVAL_TIME.ABSOLUTE.SA1.COMP
1125 -{{code language="none"}} DOOCS prop : FLASH.SDIAG/BAM//ARRIVAL_TIME.ABSOLUTE.SA1.COMPDAQ {{/code}}(%%)desc: Electron bunch arrival time measured  with the BAM  before the undulator (pulse resolved data). This one was newly installed in 2020.. The property contains only the arrival time of the bunches sent to FL2 (e.g. if there are 30 bunches in FL2 the first 30 values are the arrival time the remaining numbers still may have arbitrary numbers looking like a signal which they are not). These are the same values as the "raw" data below - just "cleaned". The values show a very good correlation to the arrival time  of the XUV pulses in the experiment (see help).
1126 -units: fs (bigger numbers (typically) indicate later arrival times of the electrons).
1127 -
1128 -\\
1129 -
1130 -\\
1131 -
1132 -(% style="color: rgb(23,43,77);" %)SEED5(% style="color: rgb(255,102,0);" %)/electron bunch arrival time (raw) (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL2/Electron Diagnostic/BAM/{{/code}}
1133 -
1134 -(% style="color: rgb(0,0,0);" %){{code language="none"}}/zraw/FLASH.SDIAG/BAM.DAQ/FL0.SEED5.ARRIVAL_TIME.ABSOLUTE.SA2/dGroup/{{/code}}(%%)
1135 -//always saved (PBD)//
1136 -(% style="color: rgb(23,43,77);" %)**FL2.SEED5**{{code language="none"}}DOOCS prop : FLASH.SDIAG/BAM//ARRIVAL_TIME.ABSOLUTE{{/code}}(%%)
1137 -**~ **(% style="color: rgb(0,0,0);" %)FLASH.SDIAG/BAM/(% style="color: rgb(0, 0, 0); color: rgb(23, 43, 77)" %)**FL2.SEED5**(% style="color: rgb(0,0,0);" %)/ARRIVAL_TIME.ABSOLUTE {{code language="none"}}DAQ channel:{{/code}}(%%)
1138 -desc: Electron bunch arrival time measured  with the BAM  before the undulator (pulse resolved data). This one was newly installed in 2020. Here the complete bunch train from the FEL is recorded (FLASH1 and FLASH2 pulses). Thus there are values from FLASH 2 in the second part. they may be separated by several "0" values if the reprate is different from 1 MHz ...  - It shows a very good correlation to the arrival time  of the XUV pulses in the experiment (see help). 
1139 -units: fs (bigger numbers (typically) indicate later arrival times of the electrons).
1140 -
1141 -\\
1142 -
1143 -(% style="color: rgb(23,43,77);" %)SEED5(% style="color: rgb(255,102,0);" %)/error (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL2/Electron Diagnostic/BAM/{{/code}}(%%)
1144 -//always saved (PBD)//
1145 -(% style="color: rgb(23,43,77);" %)**FL2.SEED5**(% style="color: rgb(0,0,0);" %)E.bamError{{code language="none"}}DOOCS prop : FLASH.SDIAG/BAM//ARRIVAL_TIM{{/code}}(%%)
1146 -(% style="color: rgb(0,0,0);" %): FLASH.SDIAG/BAM/(% style="color: rgb(0, 0, 0); color: rgb(23, 43, 77)" %)**FL2.SEED5**(% style="color: rgb(0,0,0);" %)/ARRIVAL_TIME.BAMERROR{{code language="none"}}DAQ channel{{/code}}(%%)
1147 -desc: If the value is 0 , the BAM is working well. If it is non-zero there is a problem !!
1148 -
1149 -\\
1150 -
1151 -(% style="color: rgb(23,43,77);" %)SEED5(% style="color: rgb(255,102,0);" %)/status  (HDF5 name not yet implemented - see zraw){{code language="none"}}/FL2/Electron Diagnostic/BAM/{{/code}}(%%)
1152 -//always saved (PBD)//
1153 -(% style="color: rgb(23,43,77);" %)**FL2.SEED5**(% style="color: rgb(0,0,0);" %)E.bamStatus.//2//{{code language="none"}}DOOCS prop : FLASH.SDIAG/BAM//ARRIVAL_TIM{{/code}}(%%)
1154 -(% style="color: rgb(0,0,0);" %)el: FLASH.SDIAG/BAM/(% style="color: rgb(0, 0, 0); color: rgb(23, 43, 77)" %)**FL2.SEED5**(% style="color: rgb(0,0,0);" %)/ARRIVAL_TIME.BAMSTATUS.2{{code language="none"}}DAQ chann{{/code}}(%%)
1155 -desc: status bit: 0 - data is valid; 1 - beam present; 2 - calibration ongoing; 3 - feedback enabled; 4 - feedback acting;  mostly check for bit 0 == 1 is sufficient
1156 -
1157 -\\
1158 -
1159 1159  [[Contents>>doc:||anchor="Contents"]]
1160 1160  
1161 1161  \\
... ... @@ -1180,17 +1180,6 @@
1180 1180  desc: repetition rate of the bunches / pulses within the burst (FLASH2)
1181 1181  units: kHz
1182 1182  
1183 -\\
1184 -
1185 -===== set number of pulses =====
1186 -
1187 -(% style="color: rgb(255, 0, 0); color: rgb(255, 102, 0)" %)(HDF5 name not yet implemented - see zraw)(% style="color: rgb(255,0,0);" %){{code language="none"}}/FL2/Timing/set number of bunches {{/code}}(%%)
1188 -//always saved (PBD2)//
1189 -DOOCS prop : {{code language="none"}}FLASH.DIAG/TIMINGINFO/TIME1.BUNCH_FIRST_INDEX.2 [4th number]{{/code}}
1190 -DAQ channel: {{code language="none"}}FLASH.DIAG/TIMINGINFO/TIME1.BUNCH_FIRST_INDEX.2 [4th number]{{/code}}
1191 -desc: Number of bunches set in the control (timing) system.  The property contains 4 numbers. the last one is the number of pulses (see also [[doc:FLASH.Timing properties]] (internal link)).  If pulses are used for diagnostic of the protection system of the accelerator limits the number of bunches to be accelerated and thus the actual number of pulses may be smaller than the set one 
1192 -units:
1193 -
1194 1194  ===== actual number of pulses =====
1195 1195  
1196 1196  {{code language="none"}}/FL1/Timing/actual number of bunches{{/code}}
... ... @@ -1289,129 +1289,11 @@
1289 1289  
1290 1290  \\
1291 1291  
1292 -==== FL 24 Pump Probe Laser (FLASH2) ====
1084 +==== Pump Probe Laser (FLASH2) ====
1293 1293  
1294 -These are the parameters that can be saved in the FL2 User DAQ for the FL2 PP laser//** FOR BEAMLINE FL24**//
1086 +There may be more information available from the "Laser DAQ". laese contact your Laser Local Contact.
1295 1295  
1296 -\\
1297 1297  
1298 -**User delay**
1299 -
1300 -Delay (set value):
1301 -
1302 -{{code language="none"}}FLASH.SYNC/LASER.LOCK.EXP/F2.PPL.OSC/FMC0.MD22.0.POSITION_SET.WR{{/code}}
1303 -
1304 -Delay (readback):
1305 -
1306 -{{code language="none"}}FLASH.SYNC/LASER.LOCK.EXP/F2.PPL.OSC/FMC0.MD22.0.POSITION.RD{{/code}}
1307 -
1308 -(% style="letter-spacing: 0.0px;" %)Delay (encoder readback):
1309 -
1310 -{{code language="none"}}FLASH.SYNC/LASER.LOCK.EXP/F2.PPL.OSC/FMC0.MD22.0.ENCODER_POSITION.RD{{/code}}
1311 -
1312 -OXC. jitter:
1313 -
1314 -{{code language="none"}}FLASH.SYNC/LASER.LOCK.EXP/F2.PPL.OSC/CURRENT_INPUT_JITTER.RD{{/code}}
1315 -
1316 -\\
1317 -
1318 -\\
1319 -
1320 -**FL24 Pulse resolved energy:**
1321 -
1322 -OPCPA output (photodiode signal raw ADC trace 16000 samples):
1323 -
1324 -{{code language="none"}}/zraw/FLASH.LASER/FLASH2CPUULGAN1.ADCSCOPE/CH23.TD/dGroup{{/code}}
1325 -
1326 -(% style="letter-spacing: 0.0px;" %)Upper breadboard Photodiode (THG) burst (photodiode signal raw ADC trace 16000 samples)::
1327 -
1328 -{{code language="none"}}/zraw/FLASH.LASER/FLASH2CPUULGAN1.ADCSCOPE/CH26.TD/dGroup{{/code}}
1329 -
1330 -Upper breadboard Photodiode (THG) energy (analyzed signal. integration over pulses in the ADC trace. contains for each laser pulse the pulse energy in a.u.)
1331 -
1332 -{{code language="none"}}/zraw/FLASH.LASER/MOD24.PES/FL24_userPD/dGroup{{/code}}
1333 -
1334 -\\
1335 -
1336 -**FL24 LAM (Laser Arrivaltime Monitor)  pulse resolved data:**
1337 -
1338 -Signal of Photodiode1  - for experts only... (analyzed signal. integration over pulses in the ADC trace. )
1339 -
1340 -{{code language="none"}}/zraw/FLASH.LASER/MOD24.PES/LAM.PD1/dGroup{{/code}}
1341 -
1342 -Signal of Photodiode2  - for experts only...  (analyzed signal. integration over pulses in the ADC trace.)
1343 -
1344 -{{code language="none"}}/zraw/FLASH.LASER/MOD24.PES/LAM.PD2/dGroup{{/code}}
1345 -
1346 -"Actual" LAM Signal - to be calibrated ......  (analyzed signal. integration over pulses in the ADC trace.)
1347 -
1348 -{{code language="none"}}/zraw/FLASH.LASER/MOD24.PES/LAM.PDBAL/dGroup{{/code}}
1349 -
1350 -The delay feedback(% style="letter-spacing: 0.0px;" %)
1351 -
1352 -{{code language="none"}}FLASH.LASER/ULGAN1.DYNPROP/TCFIBER.DOUBLES/DOUBLE26 {{/code}}
1353 -
1354 -The LAM delay feedback(% style="letter-spacing: 0.0px;" %) (the pulse energy signal, which is saved in the above but maybe it’s good to have this also as slow, in the case these two numbers are not the same the sysdc was active instead of the LAM):
1355 -
1356 -{{code language="none"}}FLASH.LASER/MOD24.PES/LAM.PDBAL/PULSEENERGY.MEAN{{/code}}
1357 -
1358 -LAM Delay line act:
1359 -
1360 -{{code language="none"}}FLASH.SYNC/LAM.EXP.ODL/F2.MOD.AMC12/FMC0.MD22.1.POSITION.RD{{/code}}
1361 -LAM Delay line set:
1362 -
1363 -{{code language="none"}}FLASH.SYNC/LAM.EXP.ODL/F2.MOD.AMC12/FMC0.MD22.1.POSITION_SET.WR{{/code}}
1364 -
1365 -LAM Delay line encoder:
1366 -
1367 -{{code language="none"}}FLASH.SYNC/LAM.EXP.ODL/F2.MOD.AMC12/FMC0.MD22.1.ENCODER_POSITION.RD{{/code}}
1368 -
1369 -Temperature feedback:
1370 -
1371 -{{code language="none"}}FLASH.LASER/ULGAN1.DYNPROP/TCFIBER.DOUBLES/DOUBLE24{{/code}}
1372 -
1373 -**Feedback mode** (if this is not =1 the delay FB is not active, then it’s either temp feedback controlled or failsave, maybe it’s good to have):
1374 -
1375 -{{code language="none"}}FLASH.LASER/ULGAN1.DYNPROP/TCFIBER.INTS/INTEGER30{{/code}}
1376 -
1377 -\\
1378 -
1379 -**FL24 Attenuator angle:**
1380 -
1381 -{{code language="none"}}FLASH.FEL/FLAPP2BEAMLINES/MOTOR1.FL24/FPOS{{/code}}
1382 -
1383 -**FL24 Polarization control:**
1384 -
1385 -{{code language="none"}}FLASH.FEL/FLAPP2BEAMLINES/MOTOR14.FL24/FPOS{{/code}}
1386 -
1387 -**SysDC delay error:**
1388 -
1389 -{{code language="none"}}FLASH.LASER/ULGAN1.DYNPROP/TCFIBER.DOUBLES/DOUBLE26{{/code}}
1390 -
1391 -\\
1392 -
1393 -**Timing error: (these two need to be observed and both=0 means no error)**
1394 -
1395 -{{code language="none"}}FLASH/CPUULGAN1.TIMING/ULGAN1/dT_alarm{{/code}}
1396 -
1397 -{{code language="none"}}FLASH/CPUULGAN1.TIMING/ULGAN1/dMPN{{/code}}
1398 -
1399 -**Laser error status:**
1400 -
1401 -\\
1402 -
1403 -**FL24 Virtual camera X and Y history, beam size: (use slow data)**
1404 -
1405 -{{code language="none"}}FLASH.LASER/MOD24.BEAMPOS/UV.VF_BP/CENTER.X{{/code}}
1406 -
1407 -{{code language="none"}}FLASH.LASER/MOD24.BEAMPOS/UV.VF_BP/CENTER.Y{{/code}}
1408 -
1409 -{{code language="none"}}FLASH.LASER/MOD24.CAM/UV.14.VF/ROI_SPECTRUM.X.SIG{{/code}}
1410 -
1411 -\\
1412 -
1413 -{{expand title="Parameters used until 2021"}}
1414 -
1415 1415  {{code language="none"}}/FL2/Experiment/Pump probe laser/FL24/attenuator position{{/code}}//always saved (PBD2)//
1416 1416  DOOCS prop : {{code language="none"}}FLASH.FEL/FLAPP2BEAMLINES/MOTOR1.FL24/FPOS{{/code}}
1417 1417  DAQ channel: {{code language="none"}}FLASH.FEL/FLAPP2BEAMLINES/MOTOR1.FL24/FPOS{{/code}}
... ... @@ -1444,171 +1444,7 @@
1444 1444  DAQ channel: {{code language="none"}}FLASH.SYNC/LASER.LOCK.EXP/FLASH2.PPL1.OSC1/CURRENT_INPUT_JITTER.RD{{/code}}
1445 1445  desc: rms jitter of the fs-Oscillator
1446 1446  units: fs
1447 -{{/expand}}
1448 1448  
1449 -\\
1450 -
1451 -==== FL 26 Pump Probe Laser (FLASH2) ====
1452 -
1453 -These are the parameters that can be saved in the FL2 User DAQ for the FL2 PP laser//** FOR BEAMLINE FL26**//
1454 -
1455 -\\
1456 -
1457 -**User delay**
1458 -
1459 -Delay (set value):
1460 -
1461 -{{code language="none"}}FLASH.SYNC/LASER.LOCK.EXP/F2.PPL.OSC/FMC0.MD22.0.POSITION_SET.WR{{/code}}
1462 -
1463 -Delay (readback):
1464 -
1465 -{{code language="none"}}FLASH.SYNC/LASER.LOCK.EXP/F2.PPL.OSC/FMC0.MD22.0.POSITION.RD{{/code}}
1466 -
1467 -(% style="" %)Delay (encoder readback):
1468 -
1469 -{{code language="none"}}FLASH.SYNC/LASER.LOCK.EXP/F2.PPL.OSC/FMC0.MD22.0.ENCODER_POSITION.RD{{/code}}
1470 -
1471 -OXC. jitter:
1472 -
1473 -{{code language="none"}}FLASH.SYNC/LASER.LOCK.EXP/F2.PPL.OSC/CURRENT_INPUT_JITTER.RD{{/code}}
1474 -
1475 -\\
1476 -
1477 -**Parameters for FL26**
1478 -
1479 -|(((
1480 -FL2PPL FL26 REMI Attenuation: HWP motor current position
1481 -)))|(((
1482 -FLASH.FEL/FLAPP2BEAMLINES/MOTOR11.FL26B/FPOS
1483 -)))
1484 -|(((
1485 -FL2PPL FL26 REMI Polarization: linear polarization angle
1486 -)))|(((
1487 -FLASH.FEL/FLAPP2BEAMLINES/MOTOR12.FL26B/FPOS
1488 -)))
1489 -|(((
1490 -FL2PPL FL26 REMI Diagnostics: NIR spectrum
1491 -)))|(((
1492 -FLASH.LASER/MOD26.SPECT/REMI/DAQ_CHANNEL
1493 -)))
1494 -|(((
1495 -FL2PPL FL26 REMI Diagnostics: photo diode input MOD2.6 - pulse energy mean
1496 -)))|(((
1497 -FLASH.LASER/MOD26.PES/RE_OUT/PULSEENERGY.MEAN
1498 -)))
1499 -|(((
1500 -FL2PPL FL26 REMI Diagnostics: photo diode input MOD2.6 - intra burst pulse energy
1501 -)))|(((
1502 -FLASH.LASER/MOD26.PES/RE_OUT/DAQ_CHANNEL
1503 -)))
1504 -|(((
1505 -FL2PPL FL26 REMI Diagnostics: photo diode input MOD2.6 - raw adc
1506 -)))|(((
1507 -FLASH.LASER/TAMC532DMA/ULGAN1_S5/CH04.TD
1508 -)))
1509 -|(((
1510 -FL2PPL FL26 REMI Diagnostics: photo diode input REMI - pulse energy mean
1511 -)))|(((
1512 -FLASH.LASER/MOD26.PES/INC_BOX/PULSEENERGY.MEAN
1513 -)))
1514 -|(((
1515 -FL2PPL FL26 REMI Diagnostics: photo diode input REMI - intra burst pulse energy
1516 -)))|(((
1517 -FLASH.LASER/MOD26.PES/INC_BOX/DAQ_CHANNEL
1518 -)))
1519 -|(((
1520 -FL2PPL FL26 REMI Diagnostics: photo diode input REMI - raw adc
1521 -)))|(((
1522 -FLASH.LASER/TAMC532DMA/ULGAN1_S5/CH05.TD
1523 -)))
1524 -|(((
1525 -FL2PPL FL26 REMI In coupling: filter wheel 1 position
1526 -)))|(((
1527 -FLASH/MOD26.FW1/FLASH2MOD26/pos
1528 -)))
1529 -|(((
1530 -FL2PPL FL26 REMI In coupling: filter wheel 2 position
1531 -)))|(((
1532 -FLASH/MOD26.FW2/FLASH2MOD26/pos
1533 -)))
1534 -|(((
1535 -FL2PPL FL26 REMI: Energy meter REMI incoupling breadboard
1536 -)))|(((
1537 -FLASH.LASER/MOD26.OPHIRE/REINC.54/DAQ_CHANNEL
1538 -)))
1539 -|(((
1540 -FL2PPL FL26 REMI Incoupling: focusing lens position
1541 -)))|(((
1542 -FLASH.FEL/FLAPP2BEAMLINES/MOTOR3.FL26B/FPOS
1543 -)))
1544 -|(((
1545 -FL2PPL FL26 REMI Incoupling: nearfield
1546 -)))|(((
1547 -FLASH.LASER/MOD26.CAM/REINC.21.NF/DAQ_CHANNEL
1548 -)))
1549 -|(((
1550 -FL2PPL FL26 REMI Incoupling: focus
1551 -)))|(((
1552 -FLASH.LASER/MOD26.CAM/REINC.22.FF/DAQ_CHANNEL
1553 -)))
1554 -|(((
1555 -FL2PPL FL26 REMI Drift: relative arrival time intra burst LAM balanced - calb. in the PES
1556 -)))|(((
1557 -FLASH.LASER/MOD26.PES/LAM_DIFF/DAQ_CHANNEL
1558 -)))
1559 -|(((
1560 -FL2PPL FL26 REMI Drift: forward signal (PD1)  raw
1561 -)))|(((
1562 -FLASH.LASER/TAMC532DMA/ULGAN1_S5/CH00.TD
1563 -)))
1564 -|(((
1565 -FL2PPL FL26 REMI Drift: backward signal (PD2) raw
1566 -)))|(((
1567 -FLASH.LASER/TAMC532DMA/ULGAN1_S5/CH01.TD
1568 -)))
1569 -|(((
1570 -FL2PPL FL26 REMI Drift: mean relative burst arrival time - avarage of the calib value
1571 -)))|(((
1572 -FLASH.LASER/MOD26.PES/LAM_DIFF/PULSEENERGY.MEAN
1573 -)))
1574 -|(((
1575 -FL2PPL FL26 REMI Drift: delay line position (ODL of the LAM REMI)
1576 -)))|(((
1577 -FLASH.FEL/FLAPP2BEAMLINES/MOTOR14.FL26B/FPOS
1578 -)))
1579 -|(((
1580 -FL2PPL FL26 Laser Hutch: delay line position (ODL of the osc. Sync / user delay)
1581 -)))|(((
1582 -FLASH.SYNC/LASER.LOCK.EXP/F2.PPL.OSC/FMC0.MD22.0.POSITION.RD
1583 -)))
1584 -|(((
1585 -FL2PPL FL26 REMI Drift: delay line encoder position (ODL REMI raw value)
1586 -)))|(((
1587 -FLASH.SYNC/LAM.EXP.ODL/F2.MOD.AMC12/FMC0.MD22.0.ENCODER_POSITION.RD
1588 -)))
1589 -|(((
1590 -Jiiter between oscillator and MLO (inloop jitter osc. Sync)
1591 -)))|(((
1592 -FLASH.SYNC/LASER.LOCK.EXP/F2.PPL.OSC/CURRENT_INPUT_JITTER.RD
1593 -)))
1594 -|(((
1595 -Temperature controlled fiber (PWM signal to the temperature controlled fiber delay sysdc)
1596 -)))|(((
1597 -FLASH.LASER/ULGAN1.DYNPROP/TCFIBER.DOUBLES/DOUBLE23
1598 -)))
1599 -|(((
1600 -Temperature controlled fiber (Temp of the fiber delay sysdc)
1601 -)))|(((
1602 -FLASH.LASER/ULGAN1.DYNPROP/TCFIBER.DOUBLES/DOUBLE24
1603 -)))
1604 -|(((
1605 -Sydc feedback data if LAM is not activated (sysdc delay)
1606 -)))|(((
1607 -FLASH.LASER/ULGAN1.DYNPROP/TCFIBER.DOUBLES/DOUBLE26
1608 -)))
1609 -
1610 -\\
1611 -
1612 1612  [[Contents>>doc:||anchor="Contents"]]
1613 1613  
1614 1614  \\