Settings of the alignment lasers
Adjustment of the Laser Unit Motors (with THK-Translation-Stage) NEW!
Name (Online) | Motor-No. at 'hasfvls' | Limit 1 (Switch) | Limit 1 (Software) | Limit 2 (Switch) | Limit 2 (Software) | Mirror inside beam at.. | Special Features |
|---|---|---|---|---|---|---|---|
LAS_BL1_Z | 28 | ~3 | 1 | ~-102 | -100 | -43 | Filter No.1 |
LAS_BL2_Z | 27 | ~2.5 | 0.5 | ~-51 | -49 | -43 | ------ |
LAS_BL3_Z | 25 | ~1.5 | 0.8 | ~-104 | -95 | -44 | Aperture 9mm: |
Adjustment of the Laser Unit Motors (with VAB-Manipulator) OLD!
Name (Online) | Motor-No. at 'hasfvls' | Limit 1 (Switch) | Limit 1 (Software) | Limit 2 (Switch) | Limit 2 (Software) | Mirror inside beam at.. [ruler position] | Special Features [ruler position] |
|---|---|---|---|---|---|---|---|
VLS_LAS_Z | 9 | -1 | 28.2 | [--] | ------ | ||
LAS_BL3_Z | 25 | -3.29 | -1 | -93.71 | 88 | 39 [56] | Aperture 9mm: 68.5 [26.5]; |
POWM_BL3_Z | 26 | -4.13 | -1 | 63.75 | 55 | 49 [21] | ------ |
LAS_BL2_Z | 27 | -38.54 | -1 | 55.25 | 55.15 | 55 [5] | ------ |
LAS_BL1_Z | 28 | -2.67 | -1 | 90.04 | 89 | 38 [57] | Filter No.1 |
settings of the manual screws which shift the position of the lasers. Nominal position is + 6.0 mm
Beamline | horizontal | vertical | date | comment |
BL1 | ||||
BL2 | 0.05 mm !!! | 9,85mm | May 2015 | the beam is mainly horizontal several mm away from the tube center (at the manual screen) !!! |
BL3 | 7.8mm | 7.5 mm | May 2015 | seems o.k., beamprofile is tilted ... |