Changes for page FL10M3 screen system

Last modified by sndueste on 2025/01/07 15:51
From version 8.1
edited by sndueste
on 2021/06/21 14:49
Change comment: There is no comment for this version
To version 9.1
edited by sndueste
on 2021/06/21 14:51
Change comment: There is no comment for this version

Summary

Details

Page properties
Content
... ... @@ -1,14 +1,13 @@
1 -= BL0M0 screen system =
1 += Content: =
2 2  
3 -**The BL0M0 beamblock and screen system was NEWLY installed June / July 2018 **
4 4  \\
5 5  
6 -
7 -
8 8  {{toc/}}
9 9  
10 10  \\
11 11  
9 +**The BL0M0 beamblock and screen system was NEWLY installed June / July 2018 **
10 +
12 12  Essentially the blocking of the FEL beam by the screen //and// the beam profile viewing have been separated. The beam block is operated as before "the screen" with the same buttons. To look on the beam profile a screen has to be moved in separately with the "move screen to PG / BL" buttons.
13 13  
14 14  Drawings by Svea:
... ... @@ -118,13 +118,13 @@
118 118  === Crystal ===
119 119  
120 120  * The Crystal is a 30 x 30 mm Ce:YAG crystal (0.2 mm thick) with a roughened Si scattering (0.6 mm thick) screen behind) mounted at 45 deg to the beam and the camera.
121 -* Camera calibration: For x and for y we have 22 pixel per mm. Thus if the image is quadratic the beam should be round. The crystal is still not quadratic since we see the x dimension shrinked by sqrt(2).
120 +* Camera calibration: For x and for y we have 22 pixel per mm. Thus if the image is quadratic the beam should be round. The crystal is still not quadratic since we see the x dimension shirked by sqrt(2).
122 122  
123 123  [[BL0M0 screen system>>doc:||anchor="BL0M0 screen system"]]
124 124  
125 125  === Iris ===
126 126  
127 -* the Iris is controled by haskrpiris08 192.168.58.192
126 +* the Iris is controlled by haskrpiris08 192.168.58.192
128 128  * it is connected to the plug "28c-Halle-106 rechts"
129 129  * up to now there is no remote power switch installed for the Raspy ... to come
130 130