Wiki source code of IDL cheat sheet

Version 51.1 by fwilde on 2023/02/21 18:15
Show last authors
1 == {{id name="IDLcheatsheet-Coordinatesystem"/}}Coordinate system ==
2
3 Right-handed coordinate system with y-direction along the x-ray beam.
4
5 [[image:attach:p05_uct.png||width="700"]]
6
7 == {{id name="IDLcheatsheet-Samplepositioning"/}}Sample positioning ==
8
9 === {{id name="IDLcheatsheet-Relativemovement"/}}Relative movement ===
10
11 (% class="wrapped fixed-table" %)
12 |=(((
13 IDL command
14 )))|=(((
15 description
16 )))|=(((
17 motion
18 )))
19 |(((
20 ##**s_stage_x/z, 1**##
21 )))|(((
22 move rotation stage in x/z-direction by 1 mm
23 )))|(((
24 relative [ mm ]
25 )))
26 |(((
27 ##**s_pos_x/y/z, 1**##
28 )))|(((
29 move sample stage in x/y/z-direction by 1 mm (caution with directions: stage mount on rotation axis)
30 )))|(((
31 relative [ mm ]
32 )))
33 |(((
34 ##**s_pos_lateral, 1**##
35 )))|(((
36 move sample stage in x-direction by 1 mm, regardless of position of rotation axis
37 )))|(((
38 relative [ mm ]
39 )))
40 |(((
41 ##**s_angle, 90**##
42 )))|(((
43 rotate sample around z axis
44 )))|(((
45 relative [ deg ]
46 )))
47
48 === {{id name="IDLcheatsheet-Absolutemovement"/}}Absolute movement ===
49
50 (% class="relative-table wrapped" style="width: 67.0892%;" %)
51 |=(((
52 IDL command
53 )))|=(((
54 description
55 )))|=(((
56 motion
57 )))
58 |(((
59 ##**goto_s_stage_x/z, 1**##
60 )))|(((
61 move rotation stage in x/z-direction to 1 mm
62 )))|(((
63 absolute [ mm ]
64 )))
65 |(((
66 ##**goto_s_pos_x/y/z, 1**##
67 )))|(((
68 move sample stage in x/y/z-direction to 1  mm
69 )))|(((
70 absolute [ mm ]
71 )))
72 |(((
73 ##**goto_s_angle, 90**##
74 )))|(((
75 rotate sample around z axis to 90° (**alias command: s_rot**)
76 )))|(((
77 absolute [ deg ]
78 )))
79
80 === {{id name="IDLcheatsheet-Getcurrentposition"/}}Get current position ===
81
82 (% class="relative-table wrapped" style="width: 54.0627%;" %)
83 |=(((
84 IDL command
85 )))|=(((
86 description
87 )))
88 |(((
89 ##**pos_s_stage_x/z()**##
90 )))|(((
91 return current rotation stage in x/z position
92 )))
93 |(((
94 ##**pos_s_pos_x/y/z()**##
95 )))|(((
96 return current sample stage in x/y/z position
97 )))
98 |(((
99 ##**pos_s_angle()**##
100 )))|(((
101 return current rotation stage angle
102 )))
103
104 === {{id name="IDLcheatsheet-Predefinedpositions"/}}Predefined positions ===
105
106 (% class="relative-table wrapped" style="width: 55.721%;" %)
107 |=(((
108 IDL command
109 )))|=(((
110 description
111 )))
112 |(((
113 ##**s_in**##
114 )))|(((
115 move sample to "in" position
116 )))
117 |(((
118 ##**s_out**##
119 )))|(((
120 move sample to "out" position
121 )))
122 |(((
123 ##**s_change**##
124 )))|(((
125 move sample to "change" position
126 )))
127 |(((
128 ##**set_s_in_pos, 0**##
129 )))|(((
130 set s_in position to 0.0 mm
131 )))
132 |(((
133 ##**set_s_out_dist, 10**##
134 )))|(((
135 set s_out distance to 10.0 mm
136 )))
137
138 === {{id name="IDLcheatsheet-Magnificationsets"/}}Magnification sets ===
139
140 (% class="wrapped" %)
141 |=(((
142 IDL command
143 )))|=(((
144 description
145 )))
146 |(((
147 ##**save_magn_set(, name_add)
148 **##
149 )))|(((
150 save current magnification set, optionally add something to the automatically generated name
151 )))
152 |(((
153 ##**restore_magn_set(, name)
154 **##
155 )))|(((
156 restore last magnification set, or optionally load a file with a specific name
157 )))
158
159 == {{id name="IDLcheatsheet-Detectorpositioning"/}}Detector positioning ==
160
161 (% class="wrapped fixed-table" %)
162 |=(((
163 IDL command
164 )))|=(((
165 description
166 )))|=(((
167 motion
168 )))
169 |(((
170 ##**o_ccd_dist, 5**##
171 )))|(((
172 move detector in y direction relative by 5 mm
173 )))|(((
174 relative [ mm ]
175 )))
176 |(((
177 ##**goto_o_ccd_dist, 30**##
178 )))|(((
179 move detector in y direction absoilute to 30 mm
180 )))|(((
181 \\
182 )))
183 |(((
184 ##**pos_o_ccd_dist()**##
185 )))|(((
186 return current of the camera stage distance
187 )))|(((
188 \\
189 )))
190
191 == {{id name="IDLcheatsheet-Slitpositioning"/}}Slit positioning ==
192
193 (% class="wrapped" %)
194 |=(((
195 IDL command
196 )))|=(((
197 description
198 )))
199 |(((
200 ##**slit_oh, rx=1 (rz=1)**##
201 )))|(((
202 moves oh slit aperture horizontally (vertically) by 1mm
203 )))
204 |(((
205 ##**slit_oh, rdx=1 (rdz=1)**##
206 )))|(((
207 opens oh the slit aperture horizontally (vertically) by 1 mm
208 )))
209 |(((
210 ##**slit_eh2, rx=1 (rz=1)**##
211 )))|(((
212 moves eh2 slit aperture horizontally (vertically) by 1 mm
213 )))
214 |(((
215 ##**slit_eh2, rdx=1 (rdz=1)**##
216 )))|(((
217 opens eh2 the slit aperture horizontally (vertically) by 1 mm
218 )))
219 |(((
220 ##**slit_info**##
221 )))|(((
222 show all slit positions
223 )))
224
225 rx, rdx, rz and rdz can be concatenated in one command (e.g. slit_oh, rx=1, rz=-2, rdx=0.5, rdz=0.5)
226
227 == {{id name="IDLcheatsheet-Makeandsaveimages"/}}Make and save images ==
228
229 (% class="wrapped fixed-table" %)
230 |=(((
231 IDL command
232 )))|=(((
233 description
234 )))
235 |(((
236 ##**i=quick(100) & display_image, BYSTCL(i, 0, 4096)
237 **##
238 )))|(((
239 make an image & scale image (eg. from 0 to 4096, usually from 0 to maximum value the camera can do)
240 )))
241 |(((
242 ##**a=quick_abs(100) & display_image, BYTSCL(a, 0, 2)**##
243 )))|(((
244 make an absorption image & scale image (usually from 0 to to 2)
245 )))
246 |(((
247 ##**write_tiff, '/gpfs/current/raw/test_projection.tif', i, /SHORT**##
248 )))|(((
249 save i as 16-bit integer tiff in /gpfs/...
250 )))
251 |(((
252 ##**write_tiff, '/gpfs/current/raw/test_absorption.tif', a, /FLOAT**##
253 )))|(((
254 save a as 32-bit float tiff in /gpfs/...
255 )))
256
257 \\
258
259 \\
260
261 {{info title="Monochromator positioning"}}
262 ATTENTION: Setting up a Monochromator as well as positioning front end slits is **only** done by the beamline staff!
263
264 The commands above may be used by users to realign the beam should it beam profile drift with time.
265 {{/info}}
266
267 == {{id name="IDLcheatsheet-DCMpositioning"/}}DCM positioning ==
268
269 (% class="wrapped fixed-table" %)
270 |=(((
271 IDL command
272 )))|=(((
273 description
274 )))|=(((
275 motion
276 )))
277 |(((
278 ##**dcm_pitch, 0.00001**##
279 )))|(((
280 move 2nd crystal pitch by 0.00001 deg
281 )))|(((
282 relative [ deg ]
283 )))
284 |(((
285 ##**goto_dcm_pitch,  -0.03976**##
286 )))|(((
287 move 2nd crystal pitch to -0.03976 deg
288 )))|(((
289 absolute [ deg ]
290 )))
291 |(((
292 ##**reflex_opt_single**##
293 )))|(((
294 move 2nd crystal pitch to optimal flux position
295 )))|(((
296 \\
297 )))
298
299 == {{id name="IDLcheatsheet-DMMpositioning"/}}DMM positioning ==
300
301 (% class="fixed-table wrapped" %)
302 |=(((
303 IDL command
304 )))|=(((
305 description
306 )))|=(((
307 motion
308 )))
309 |(((
310 ##**dmm_x2_rot, 0.001**##
311 )))|(((
312 move 2nd crystal pitch by 0.00001 deg
313 )))|(((
314 relative [ deg ]
315 )))
316 |(((
317 ##**goto_dmm_x2_rot,  0.8923
318 **##
319 )))|(((
320 move 2nd crystal pitch to 0.8923 deg
321 )))|(((
322 absolute [ deg ]
323 )))
324
325 \\
326
327 == {{id name="IDLcheatsheet-Generalsyntax"/}}General syntax ==
328
329 (% class="wrapped relative-table" style="width: 45.5603%;" %)
330 |=(((
331 Functionality
332 )))|=(((
333 IDL syntax
334 )))
335 |(((
336 chaining commands
337 )))|(((
338 command_1 **&** command_2 **&** ...
339 )))
340 |(((
341 absolute movement
342 )))|(((
343 **goto_**//motor//, position
344 )))
345 |(((
346 relative movement
347 )))|(((
348 //motor//, position
349 )))
350 |(((
351 current motor position
352 )))|(((
353 **pos_**//motor//()
354 )))
355
356 == {{id name="IDLcheatsheet-BeamshutterandInterlockcontrol"/}}Beamshutter and Interlock control ==
357
358 (% class="wrapped relative-table" style="width: 75.0455%;" %)
359 |=(((
360 IDL command
361 )))|=(((
362 description
363 )))
364 |(((
365 ##**bs_info**##
366 )))|(((
367 prints an overview of the beamline beamshutter status
368 )))
369 |(((
370 ##**bsoh_open / bsoh_close**##
371 )))|(((
372 opens / closes the optics hutch beamshutter. Closing the OH beamshutter will close all following beamshutters (EH1, EH2)
373 )))
374 |(((
375 ##**bseh1_open / bseh1_close**##
376 )))|(((
377 opens / closes the EH1 beamshutter. Opening will open the OH beamshutter as well. Closing the OH beamshutter will the EH2 beamshutter as well
378 )))
379 |(((
380 ##**bseh2_open / bseh2_close**##
381 )))|(((
382 opens / closes the EH2 beamshutter. Openening will open the OH and EH1 beamshutters as well.
383 )))
384 |(((
385 ##**ics_info**##
386 )))|(((
387 prints an overview of the beamline interlock status
388 )))
389 |(((
390 ##**oh_break_ics**##
391 )))|(((
392 closes all P05 beamshutters and breaks OH door interlock. P06 beamshutter must be closed for this command to work!
393 )))
394 |(((
395 ##**eh1_break_ics**##
396 )))|(((
397 closes EH1 beamshutter (and EH2 beamshutter  if open) and breaks EH1 door interlock
398 )))
399 |(((
400 ##**eh2_break_ics**##
401 )))|(((
402 closes EH2 beshutter and breaks EH2 door interlock
403 )))