IDL cheat sheet
Version 6.1 by moosmanj on 2018-05-28 16:16
This is an overview of the most commonly used commands during a beamtime.
Sample positioning
IDL command | description | motion |
|---|---|---|
s_stage_x/z | move rotation stage in x/z-direction | relative [ mm ] |
s_pos_x/y/z | move sample stage in x/y/z-direction | relative [ mm ] |
s_rot, 90 | rotate rotation stage to 90 degrees | absolute [ deg ] |
Detector positioning
IDL comman | description | motion |
|---|---|---|
pressure_on | enable detector y movement | |
o_ccd_dist, 5 | move detector in y direction | relative [ mm ] |
pressure_off | disable detector movement |
Monochromator positioning
IDL command | description | motion |
|---|---|---|
calc_dcm_energy, 10000, /set | set DCM and undulator to 10 keV | |
dcm_pitch, 0.00001 | move 2nd crystal pitch by 0.00001 deg | relative [ deg ] |
goto_dcm_pitch, -0.03976 | move 2nd crystal pitch to -0.03976 deg | absolute [ deg ] |
reflex_opt | move 2nd crystal pitch to optimal flux position |